The Problem
Installing a rainscreen and lath separately requires additional fasteners and increases labor costs. Metal mesh poses a safety hazard to the workers during installation due to sharp metal. Installing absorptive cladding over wood-based sheathing can lead to moisture damage to the wall assembly.
The Solution
The DELTA®-DRY & LATH is a 2-in-1 product that combines the proven technology of the DELTA®-DRY rainscreen with an innovative fiberglass lath for a complete, one-step moisture control and lath system in one. By combining these two critical components in one, an entire step is eliminated from the construction process. DELTA®-DRY & LATH eliminates the need for a metal lath, providing easier and safer handling for the installer. The alkali-resistant glass is not affected by chemicals and will not corrode.
Solar-driven moisture is stopped before it can do any damage. At the same time, DELTA®-DRY & LATH also allows any incidental moisture from within the wall to dry to the outside.
DELTA®-DRY & LATH is extremely durable and will protect the building from moisture damage well into the future.
Product Details
Ventilated rainscreen with pre-installed glass lath for manufactured stone and conventional stucco claddings.
Rainscreen membrane with Air-gap Technology made of a special High-Density Polyethylene (HDPE)
Alkali-resistant glass lath that replaces wire lath for application of scratch coat
Two-sided drainage and ventilation through a unique dimple and groove design
Product Benefits
DELTA®-DRY & LATH is easy, safe, and quick to install
The 2-in-1 solution reduces labor costs when used with claddings requiring scratch coat
DELTA®-DRY & LATH has a pre-installed glass lath, which makes it ideal for installing absorptive claddings
Drainage and ventilation through the air gap on the interior and exterior side of the membrane
Long-term structural integrity due to a reduced potential for water
The pre-installed, alkali-resistant glass lath is in compliance with ICC-ES AC 275 (MVMA requirements) Meets ASTM E2925-17 (Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function)
IAPMO Evaluation Number 323
Rajoni i disponueshëm
Europe | North America |
---|---|
Åland Islands | Anguilla |
Andorra | Antigua dhe Barbuda |
Austri | Aruba |
Belgjikë | Bahamas |
Bjellorusi | Barbados |
Bosnjë dhe Hercegovinë | Belize |
Bulgari | Bermuda |
Danimarkë | Dominica |
Estoni | El Salvador |
Finlandë | Grenada |
Francë | Grenlandë |
Gërnzi | Guadeloupe |
Gjermani | Guatemala |
Gjibraltar | Haiti |
Greqi | Honduras |
Holandë | Ishujt e Virgjër Britanikë |
Hungari | Ishujt e Virgjër të SHBA |
Irlandë | Ishujt Kajman |
Ishujt Faroe | Kanadë |
Ishulli i Njeriut | Karaibe Holandë |
Islandë | Kolektiviteti i Shën Martinit |
Itali | Kosta Rika |
Jersey | Kubë |
Kroacia | Kuraçao |
Letoni | Martinique |
Liechtenstein | Meksikë |
Lituani | Montserrat |
Luksemburg | Nikaragua |
Mali i Zi | Panama |
Maltë | Porto Riko |
Maqedonia e Veriut | Republika Domenikane |
Mbretëria e Bashkuar | Saint-Barthélemy |
Moldovë | Shën Kitts dhe Nevis |
Monaco | Shën Lucia |
Norvegji | Shën Pierre dhe Miquelon |
Poloni | Shën Vincent dhe Grenadinet |
Portugali | Shtetet e Bashkuara |
Qipro | Sint Maarten |
Qyteti i Vatikanit | Trinidad dhe Tobago |
Republika Çeke | Turks dhe Caicos Islands |
Rumani | Xhamaika |
Rusi | |
San Marino | |
Serbia | |
Shqipëri | |
Sllovenia | |
Slovakia | |
Spanjë | |
Suedi | |
Svalbard dhe Jan Mayen | |
Switzerland | |
Ukrainë |