ARDEX K 530™ Decorative Concrete Toping
ARDEX K 530™ Decorative Concrete Toping
ARDEX K 530™ Decorative Concrete Toping
ARDEX K 530™ Decorative Concrete Toping
    ARDEX

    ARDEX K 530™ Decorative Concrete Toping

    ARDEX K 530™ is a self-leveling, decorative topping for fast-track resurfacing, smoothing or leveling of indoor concrete and certain non-porous surfaces. ARDEX K 530 can be installed up to 1” (25 mm) thick neat and up to 3″ (7.5 cm) thick with the addition of approved decorative aggregates. Use ARDEX K 530 in areas where a decorative floor is desired to provide a hard, flat, smooth surface that can be sealed. Also use over concrete and terrazzo substrates in areas that require a polished surface. Sealing or polishing can proceed in as little as 24 hours.

    Key Features

    • A blend of Portland cement and other hydraulic cements
    • Resurface indoor concrete and certain non-porous surfaces Walk on in 2 – 3 hours, seal in as little as 24 hours
    • Polish in as little as 24 hours
    • Natural White color
    • For use as a binder for custom aggregate and colorants
    • Use for interior floors only

    Standards

    Tested in accordance with ASTM C1708

    Specifikim
    • Installation

      Mixing Ratio: 5 quarts (4.73 L) of water per 50 lb. (22.7 kg) bag
      Coverage: 25 sq. ft. per bag at 1/4” (2.4 sq. m at 6 mm)
      16.7 sq. ft. per bag at 3/8″ (1.6 sq. m at 9.5 mm)
      12.5 sq. ft. per bag at 1/2” (1.2 sq. m at 12 mm)

      Performance

      Flow time: 10 minutes
      Compressive strength (ASTM C109/mod – air cure only): 6,000 psi (420 kg/sq. cm.) at 28 days
      Flexural strength (ASTM C348): 1,200 psi (84 kg/sq. cm.) at 28 days
      Walkable: 2 – 3 hours
      Min. Cure Time prior to coating: Waterborne: 24 hours
      Solvent-borne and 100% solids (less than 20 mils/0.5 mm): 48 hours
      High build polymer coating (greater than 20 mils/0.5 mm): 7 days
      VOC: 0
      Packaging: 50 lb. (22.7 kg) net weight bag
      Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
      Shelf life: Nine months, if unopened
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

    Specifikime teknike
    • Referencë unikeARDEX-K-530
    • Familja e produkteveARDEX Surfaces
    • Grupi i produkteveOverlays and Toppings
    • LlojiObjekt (një objekt të vetëm)
    • Data e botimit2024-02-21
    • Numri i botimit1
    Klasifikimi
    • Kategoria BIMobjectDysheme - Shtresë përfund
    • IFC classificationKat
    • Emrin UNSPSCCarpet or rug underlays
    • UNSPSC code30161719
    • Uniclass 2015 CodePr_35_31_06_80
    • Uniclass 2015 PërshkrimSmoothing and levelling underlay compounds
    • CSI MasterFormat 2014 Code06 16 26
    • CSI MasterFormat 2014 TitleUnderlayment
    • OmniClass Number23-15 17 11 13 11 13
    • OmniClass TitlePortland Cement Floor Underlayments
    • CSI UniFormat II CodeB1010
    • CSI UniFormat II TitleFloor Construction

    Rajoni i disponueshëm

    North America
    Anguilla
    Antigua dhe Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Dominica
    El Salvador
    Grenada
    Grenlandë
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Ishujt e Virgjër Britanikë
    Ishujt e Virgjër të SHBA
    Ishujt Kajman
    Kanadë
    Karaibe Holandë
    Kolektiviteti i Shën Martinit
    Kosta Rika
    Kubë
    Kuraçao
    Martinique
    Meksikë
    Montserrat
    Nikaragua
    Panama
    Porto Riko
    Republika Domenikane
    Saint-Barthélemy
    Shën Kitts dhe Nevis
    Shën Lucia
    Shën Pierre dhe Miquelon
    Shën Vincent dhe Grenadinet
    Shtetet e Bashkuara
    Sint Maarten
    Trinidad dhe Tobago
    Turks dhe Caicos Islands
    Xhamaika