Опубликуйте свои продукты
Light Commercial Roll-up Door Model DS-100
Wayne Dalton

Light Commercial Roll-up Door Model DS-100

Our DS Series Roll-Up Sheet doors are light commercial roll-up doors designed to be versatile, durable and easy to operate. Each door in the DS Series is constructed of 26-gauge, galvanized steel and features automatic door stops, a steel axle to support the door curtain and counterbalance system and oil-tempered steel springs for smooth cycle performance. With a variety of colors, options and sizes to choose from, these doors will fit almost any commercial application.

These light duty sheet doors are perfect for light commercial applications with openings up to 10’ wide by 10’ high, such as mini-storage buildings, loading docks, and service buildings. 18-gauge guides allow for easy installation to masonry or steel with no special preparation or overhead tracks needed.

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

Cпецификация
  • Key Product Features

    • Max Width: 10’
    • Max Height: 10’
    • 26-gauge galvanized steel
    • Manual lift operation

    Product Information

    • Corrugated door curtain, available in round profile, is hot-dipped galvanized 26-gauge steel, primed then finished with high gloss, silicone polyester paint.
    • Polypropylene anti-wear strips come factory-installed as continuous guides for sliding metal parts, providing quieter operation and longer service life.
    • Rigid support bracket with bearings hold constant door tension, and allow easy adjustments.
    • Bottom bar assembly includes heavy-duty steel angle, extruded aluminum bottom bar and replaceable tubular-type vinyl astragal.
    • Slide-bolt assemblies fabricated of heavy-duty steel lock the closed door from inside at the bottom corners (not shown; door has optional mini curtain lock.) For added security, both slide bolts accept padlocks.
    • Roll-up door guides are 18-gauge galvanized steel, 2" wide and install to masonry, steel or wood construction equally well.
    • Automatic door stops prevent door from rolling up past the header.
    • Oil-tempered steel spring is engineered to counterbalance different door sizes and weights for smooth, easy operation.
    • Heavy-duty steel axle supports door curtain and counterbalance system.

    Options & Accessories

    • Wind load available up to ±34 psf on doors 10’ maximum in width
    • Insulation featuring two layers of aluminum mylar film laminated to two layers of heavy-duty polyethylene air-bubble material. An R-value* of 4 helps control heat gain/loss. Includes flexible vinyl top and side draft stops as weather seals between the door and the building.
    • Locks: slide bolt or curtain

    *Wayne Dalton uses a calculated door section R-value for insulated doors.

Техническая спецификация
  • Уникальная ссылкаroll-up-sheet-door-ds100
  • Тип продукцииCommercial Doors
  • Группа продукцииRolling Doors
  • ТипОбъект (один объект)
  • Дата публикации2024-07-01
  • Номер версии1
Связанные
  • Основной материалСталь
  • Разработано вСоединенные Штаты Америки
  • Страна-производительСоединенные Штаты Америки
Классификация
  • Категория BIMobjectДвери - Промышленные двери
  • Классификация IFCДверь
  • Код CSI MasterFormat 201408 33 23
  • Заголовок CSI MasterFormat 2014Overhead Coiling Doors
  • Номер OmniClass23-17 11 13 25
  • Наименование OmniClassOverhead Metal Doors

Доступно в регионах:

Северная Америка
Ангилья
Антигуа и Барбуда
Аруба
Багамы
Барбадос
Белиз
Бермуды
Бонэйр
Британские Виргинские острова
Виргинские Острова
Гаити
Гваделупа
Гватемала
Гондурас
Гренада
Гренландия
Доминика
Доминиканская Республика
Канада
Коста-Рика
Куба
Кюрасао
Мартиника
Мексика
Монтсеррат
Никарагуа
Острова Кайман
Острова Теркс и Кайкос
Панама
Пуэрто-Рико
Сальвадор
Сен-Бартелеми
Сен-Мартен
Сен-Пьер и Микелон
Сент-Винсент и Гренадины
Сент-Китс и Невис
Сент-Люсия
Синт-Мартен
Соединенные Штаты Америки
Тринидад и Тобаго
Ямайка