Опубликуйте свои продукты
 ASME Potable Water Expansion Tanks - DETA Series
 ASME Potable Water Expansion Tanks - DETA Series
 ASME Potable Water Expansion Tanks - DETA Series
 ASME Potable Water Expansion Tanks - DETA Series
    Watts

    ASME Potable Water Expansion Tanks - DETA Series

    Series DETA ASME Potable Water Expansion Tanks are used on commercial and industrial potable hot water applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the potable water supply system by keeping system pressure below the T&P relief valve setting. It has a field-adjustable carbon steel tank (prime painted exterior) with an FDA-approved and fixed, Butyl rubber bladder, stainless steel NPT male inlet connection, and a .302 to 32 in. charging valve connection (standard tire valve) for on-site charging of the tank. It is pre-pressurized and precharged to 40psi (275.8 kPa). ASME, Section VIII approved. Maximum Design Pressure: 150psi (10 bar).

    Cпецификация
    • Features

      • ASME Section VIII Construction
      • Fixed Butyl Bladder (FDA approved)
      • Bladder Integrity Monitor
      • Precharged to 40 psi (field adjustable)
      • Complies with NSF/ANSI Standard 61


      Keywords: drain, plumbing, pipe, pump,floor drain, watts, drainage, pump, quick connect fitting, booster pumps, rainwater harvesting, water installation

    Техническая спецификация
    • Уникальная ссылкаDETA-Series-Expansion-Tank
    • Тип продукцииPlumbing & Flow Control Solutions
    • Группа продукцииWater Heater Accessories
    • ТипОбъект (один объект)
    • Дата публикации2023-01-27
    • Номер версии1
    Связанные
    • Основной материалУглеродистая сталь
    • Разработано вСоединенные Штаты Америки
    • Страна-производительСоединенные Штаты Америки
    Классификация
    • Категория BIMobjectСантехника - Сантехника
    • Классификация IFCРезервуар
    • Код Uniclass 2015Pr_60_50_96_84
    • Описание Uniclass 2015Stainless steel tanks
    • Код CSI MasterFormat 201422 12 23.13
    • Заголовок CSI MasterFormat 2014Facility Steel, Indoor Potable-Water Storage Pressure Tanks
    • Номер OmniClass23-31 29 13
    • Наименование OmniClassHot Water Tank Heaters
    • Код CSI UniFormat IID2010
    • Заголовок CSI UniFormat IIPlumbing Fixtures

    Доступно в регионах:

    Северная Америка
    Канада
    Соединенные Штаты Америки