QF Double Branch 45°

Nordfab manufactures ducting for use in dust, mist, and fume collection systems.

Quick-Fit® Double Branches are standard with QF® rolled ends, allowing quick connections with other QF ductwork.

When ordering, specify material; gauge (if nonstandard); dimensions A, B, C, and D; end styles if not all QF; and angle.
(A - C) ≥ (C-B) and (C) ≥ (D). Use formula above to determine if a reducer is needed at C or D.
Length = C X 2 + 9"
Available in galvanized steel and 304SS (as shown below) or optional 316SS or carbon steel
Available with flanged ends in diameters up to 72", and other various end types
Available with 30° angle
Other available gauges include standard 22 and 20, 18, 16, 12 and 10

Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options.

Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Cпецификация

A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.
1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.
B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.
C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.

Техническая спецификация

Уникальная ссылкаus-qf-double-branch-45deg
Тип продукцииQuick-Fit Clamp Together Ducting
Группа продукцииBranches
ТипОбъект (один объект)
Дата публикации2024-05-08
Номер версии1

Ссылки

Ссылка на продукциюhttps://www.nordfab.com/en-us/products/qf-ducting/branches/us-qf-double-branch-45deg
Техническое описаниеhttps://www.nordfab.com/-/media/files/nordfab/americas/americas-product-data-sheets/nordfab_double_branch.pdf

Связанные

Основной материалОцинкованная сталь
Вспомогательный материалStainless steel 304
Разработано вСоединенные Штаты Америки
Страна-производительСоединенные Штаты Америки

Классификация

Категория BIMobjectВентиляция и кондиционирование воздуха - Dust Collection
Классификация IFCСоединение воздуховода
Код ETIMEG015540
Название ETIMFittings, flanges and connectors
Код Uniclass 2015Pr_65_65_25
Описание Uniclass 2015Ductwork and fittings
Код CSI MasterFormat 201423 31 13.19
Заголовок CSI MasterFormat 2014Metal Duct Fittings
Номер OmniClass23-33 49 00
Наименование OmniClassHVAC Ductwork

Доступно в регионах:

Северная Америка
Белиз
Бермуды
Британские Виргинские острова
Канада
Коста-Рика
Мексика
Панама
Пуэрто-Рико
Сен-Мартен
Соединенные Штаты Америки

QF Double Branch 45°

Похожие продукты

Для производителей

О компании

Юридические вопросы