NKVE-Booster-sets

Name: NKVE-Booster-sets
Rating: 4.4 (10 reviews)

4.4(10 reviews)

1, 2, 3, 4 NKVE 10, 15, 20, 32, 45 MCE-P are variable pressure units for residential building service and commercial building service. They can also be used in agriculture and in watering systems. NKVE are 1, 2, 3 or 4 multi-impeller vertical centrifugal pumps with coupling with MCE-P variable frequency drive installed as standard. The models with NKVE 10 S, 15 S, 20 S have the parts in contact with the liquid in AISI 304 stainless steel. The models with NKVE 32 and 45 have the pump body and upper flange in cataphorized cast iron. The impellers, diffusers and pump casing are in AISI 304 stainless steel. One control unit and one pressure sensor per units. Delivery check valve and expansion vessel for each pump. X version with materials in contact with water in stainless steel AISI 316. The units are supplied assembled, set and tested directly at the factory. IE3 electric motors. D.Connect ready (D.Connect Box supplied separately).

Cпецификация

1, 2, 3, 4 NKVE 10, 15, 20, 32, 45 MCE-P are variable pressure units for residential building service and commercial building service. Galvanized steel base. They can also be used in agriculture and in watering systems. There are 1, 2, 3 or 4 multi-impeller vertical centrifugal pumps with coupling with MCE-P variable frequency drive installed as standard. One control unit and one pressure sensor per units. Delivery check valve and expansion vessel for each pump. Suction and delivery manifolds in AISI 304 stainless steel. Possibility of remote control thanks to the D.Connect service (D.Connect Box supplied separately). The units are supplied assembled, set up and tested directly in the factory and complete with installation and maintenance instructions and test report of the test. The NKVE 10 S, 15 S and 20 S models have all the parts in contact with the liquid in stainless steel. Internal pump body, impellers and jacket in AISI 304 steel, diffusers in technopolymer. Removable mechanical seal in silicon carbide-graphite. It is possible to remove it without removing the motor, starting from the 5.5 kW models. The NKV 32 and 45 versions have the impellers, diffusers and jacket in AISI 304 stainless steel. Pump body and sealing port in cataphorized cast iron. Mechanical seal in removable silicon carbide-graphite without removing the motor starting from the 5.5 kW models. Available on request version X with materials in contact with water in AISI 316 stainless steel.

Техническая спецификация

Уникальная ссылкаNKVE-Booster-sets
Тип продукцииVSD Booster set
Группа продукцииVSD Booster set
ТипСтроительные материалы
Дата публикации2020-12-17
Номер версии1

Ссылки

Ссылка на продукциюhttps://www.dabpumps.com/en/products/pressure-units/electronic-pressure-units/1-2-3-4-nkve-10-15-20-32-45-mce-p
Инструкции по монтажуhttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_001359321.pdf
Сертификация продукцииhttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_001359321.pdf
Техническое описаниеhttps://www.dabpumps.com/sites/default/files/document/60152203_1-2-3-4-NKVE_MCE_TS_ENG.pdf

Связанные

Основной материалСталь
Вспомогательный материалCast iron
Разработано вИталия
Страна-производительИталия

Классификация

Категория BIMobjectСантехника - Насосы
Код CSI MasterFormat 201422 11 23
Заголовок CSI MasterFormat 2014Domestic Water Pumps
Код CSI UniFormat IID2010
Заголовок CSI UniFormat IIPlumbing Fixtures

Доступно в регионах:

Европа
Австрия
Аландские острова
Албания
Андорра
Беларусь
Бельгия
Болгария
Босния и Герцеговина
Великобритания
Венгрия
Германия
Гернси
Гибралтар
Греция
Дания
Джерси
Ирландия
Исландия
Испания
Италия
Кипр
Латвия
Литва
Лихтенштейн
Люксембург
Мальта
Молдова
Монако
Нидерланды
Норвегия
о-в Мэн
Папский Престол (Государство-город Ватикан)
Польша
Португалия
Россия
Румыния
Сан-Марино
Северная Македония
Сербия
Словакия
Словения
Украина
Фарерские о-ва
Финляндия
Франция
Хорватия
Черногория
Чехия
Швейцария
Швеция
Шпицберген
Эстония

NKVE-Booster-sets

Похожие продукты

Для производителей

О компании

Юридические вопросы