Опубликуйте свои продукты
Henkel Polybit Watertite WA11
Polybit

Henkel Polybit Watertite WA11

Watertite WA 11 system is a composite waterproofing membrane and tile finish system, which is designed for rigid concrete surfaces in indoor conditions and which are exposed to moderate water splashes without hydrostatic pressure. Designed to be used in concrete floors and walls in domestic showers, toilets and kitchens classified as rigid surfaces, which are subjected to occasional or brief exposures to water splashes. The water exposure of such areas is categorized as moderate without hydrostatic pressure in indoor conditions.

Fields of application: indoor concrete floors and walls in domestic showers, toilets and kitchens classified as rigid surfaces, which are are subjected to occasional or brief exposures to water splashes.

Cпецификация
  • Characteristics:

    • Good flexibility
    • Thermal co-efficient of expansion similar to that of concrete
    • Good adhesion to both porous and non-porous surfaces
    • Good mechanical properties
    • For ceramic tiles (glazed & terracotta), vitrified tiles, porcelain tiles, mosaic tiles and natural stones like granite, sandstone
    • Easy workability
    • Crack resistance
    • Smooth surface finish
    • Anti fungal/Anti bacterial

    Components:

    1. Polyflex - A two component polymer mortar composite flexible water proofing slurry is applied at a minimum thickness of 2mm in two coats on the concrete surface to protect the underlying screed against moisture penetration.

    2. Watertite CL 252 - Non-woven sealing tape applied in all corners, joints, edges, floor drains and other penetrations.

    3. Ceresit CM11 - Universal polymer modified cementitious tile adhesive with very low emissions for indoor and outdoor areas.

    4. Ceresit CE33 - cement-based tile grout for filling joints in floor & wall of ceramic, porcelain, mosaic, natural stone, marble & granite indoor and outdoor areas. For joints between 1 and 8mm wide.

    System specification:

    - Mixed density, [g/cc]: 1.8±0.02 (ASTM D 1475)

    - Tensile strength, [N/mm2]: > 8 (ASTM D 412)

    - Elongation, [%]: > 50 (ASTM D 412)

    - Adhesion strength, [N/mm2]: > 0.5 (ASTM D 4541)

    - Crack bridging, [mm]: > 0.5 (ASTM C 836)

    - Hydrostatic pressure @ 5 bar: No leakage (BS EN 12390)

    - Hydrostatic negative pressure@ 3 bar: No leakage (BS EN 12390)

    - Toxicity: Non toxic (BS 6920 [WRAS])

    - Reaction to fire: Class A (ASTM E 84)

    - Abrasion resistance, [mg]: < 75 (ASTM D 4060)

    - VOC, [g/l]: < 50 (ASTM D 3960/D 236)

Техническая спецификация
  • Уникальная ссылкаwatertite-wa-11
  • ТипОбъект (один объект)
  • Дата публикации2023-12-18
  • Номер версии1
Связанные
  • Основной материалCementitious
  • Вспомогательный материалАкрил
  • Разработано вОбъединенные Арабские Эмираты
  • Страна-производительОбъединенные Арабские Эмираты
Классификация
  • Категория BIMobjectСтроительные материалы - Waterproofing & Membranes
  • Классификация IFCСтроительный элемент
  • Код Uniclass 2015Pr_20_31_02_89
  • Описание Uniclass 2015Tile adhesives
  • Код CSI MasterFormat 201409 30 00
  • Заголовок CSI MasterFormat 2014Tiling
  • Номер OmniClass23-15 17 13 13
  • Наименование OmniClassTile Flooring
  • Код CSI UniFormat IIC30
  • Заголовок CSI UniFormat IIINTERIOR FINISHES

Доступно в регионах:

Азия
Объединенные Арабские Эмираты