CD60GS (GENSET) Damper

Name: CD60GS (GENSET) Damper
Rating: 4.2 (5 reviews)

4.2(5 reviews)

Traduzido pelo Google,

Amortecedor de lâmina de aerofólio de aço galvanizado de alto desempenho Classificação de vazamento AMCA Classe IA (GENSET)

O CD60GS foi projetado para fornecer o máximo de ar de combustão e alívio de pressão rapidamente para a partida do gerador de emergência para evitar danos ao equipamento ou ao espaço circundante. O atuador aberto por mola de 8 segundos de ação rápida montado na fábrica fornece desempenho e confiabilidade ideais. O CD60GS também fornece classificação de vazamento AMCA classe 1A de 3cfm/ft2 a 1” wg quando as lâminas estão fechadas para atender aos requisitos do Código Internacional de Conservação de Energia (IECC).

Especificação

Furnish and install, at locations shown on plans, low leakage airfoil control dampers meeting the following minimum construction standards. Control dampers shall be produced in an ISO9001 certified factory. Frame shall be one-piece uniframe construction of 16 ga. (1.6) galvanized steel roll formed hat channel structurally equivalent to a minimum 13 ga. (2.4) frame. Blades shall be 14 ga. (2.0) equivalent galvanized steel, rollformed airfoil type for low pressure drop and low noise generation. Blade edge seals shall be Santoprene TPV type or equivalent mechanically locked into the blade edge.
Adhesive or clip-on type seals are unacceptable. Jamb seals shall be stainless steel chambered compression type to prevent leakage between blade end and damper frame. Blade end overlapping frame is unacceptable. Multiple section dampers must have factory installed jackshafts unless clearly eliminated by engineer. Bearings shall be 304 stainless steel, oil impregnated, and self-lubricating sleeve type with a 450 pound (204 kg) minimum radial crush load. Bearings shall turn in extruded holes in the damper frame. Axles shall be hexagonal positively locked into the damper blade.
Linkage shall be concealed out of airstream, within the damper frame to reduce pressure drop and noise. Temperature limits shall be -72°(-58°C) to +275°F (+135°C). Submittal must include leakage, maximum air flow and maximum pressure ratings based on AMCA Publication 500. Damper shall be tested and licensed in accordance with AMCA 511 for Air Performance and Air Leakage. Damper widths from 12” to 48” (305 to 1219) wide shall not leak any greater than 3 cfm/sq.ft. at 1” w.g. (15.2 l/s-m2
at .25 kPa). Damper shall be factory equipped with fast acting 8-second spring return electric actuator with 40,000 open/closed cycle testing, and shall be equivalent in all respects to Ruskin Model CD60GS.

Especificação técnica

Ref. únicaCD60GS
Família de produtoDampers for Air Ductwork
Grupo de produtosCommercial Control Dampers
TipoObjeto (objeto único)
Data de publicação2022-07-28
Número da edição1

Links

Url do produtohttps://www.ruskin.com/model/cd60gs-genset
Descrição técnicahttps://www.ruskin.com/doc/Id/9866
Informações sobre licitaçõeshttps://www.ruskin.com/doc/Id/10091

Afins

Material principalAço galvanizado
Desenhado emUnited States
Fabricado emUnited States

Classificação

Categoria BIMobjectAVAC - Dutos
Classificação IFCAmortecedor
Nome UNSPSCVentilation dampers
Código UNSPSC40101504
Código Uniclass 2015Pr_65_65_24
Descrição Uniclass 2015Duct dampers
CSI MasterFormat 2014 Code23 09 13.43
Título CSI MasterFormat 2014Control Dampers
Número OmniClass23-33 29 00
Título OmniClassHVAC Dampers
CSI UniFormat II CodeD3090
Título UniFormat II da CSIOther HVAC Systems & Equipment

Disponibilidade regional

Europa	Ásia	América do Norte	África	América do Sul	Oceânia
Åland Islands	Afghanistan	Anguilla	Algeria	Argentina	American Samoa
Albania	Armenia	Antigua and Barbuda	Angola	Bolivia	Australia
Andorra	Azerbaijan	Aruba	Benin	Brasil	Cook Islands
Austria	Bahrain	Barbados	Botswana	Chile	Federated States of Micronesia
Belarus	Bangladesh	Belize	Burkina Faso	Colombia	Fiji
Belgium	Bhutan	Bermuda	Burundi	Ecuador	French Polynesia
Bosnia and Herzegovina	British Indian Ocean Territory	British Virgin Islands	Cabo Verde	Falkland Islands (Islas Malvinas)	Guam
Bulgaria	Brunei	Canada	Cameroon	French Guiana	Kiribati
Croatia	Cambodia	Caribbean Netherlands	Central African Republic	Guyana	Marshall Islands
Cyprus	China	Cayman Islands	Chad	Paraguay	Nauru
Czech Republic	Christmas Island	Collectivity of Saint Martin	Comoros	Peru	New Caledonia
Denmark	Cocos (Keeling) Islands	Costa Rica	Côte d'Ivoire	Suriname	New Zealand
Estonia	Georgia	Cuba	Democratic Republic of the Congo	Uruguay	Niue
Faroe Islands	Hong Kong	Curaçao	Djibouti	Venezuela	Norfolk Island
Finland	India	Dominica	Egypt		Northern Mariana Islands
France	Indonesia	Dominican Republic	Equatorial Guinea		Palau
Germany	Iran	El Salvador	Eritrea		Papua New Guinea
Gibraltar	Iraq	Greenland	Ethiopia		Pitcairn Islands
Greece	Israel	Grenada	Gabon		Samoa
Guernsey	Japan	Guadeloupe	Ghana		Solomon Islands
Hungary	Jordan	Guatemala	Guiné-Bissau		Timor-Leste
Iceland	Kazakhstan	Haiti	Guinea		Tokelau
Ireland	Kuwait	Honduras	Kenya		Tonga
Isle of Man	Kyrgyzstan	Jamaica	Lesotho		Tuvalu
Italy	Laos	Martinique	Liberia		United States Minor Outlying Islands
Jersey	Lebanon	Mexico	Libya		Vanuatu
Latvia	Macau	Montserrat	Madagascar		Wallis and Futuna
Liechtenstein	Malaysia	Nicaragua	Malawi
Lithuania	Maldives	Panama	Mali
Luxembourg	Mongolia	Puerto Rico	Mauritania
Macedônia do Norte	Myanmar (Burma)	Saint Kitts and Nevis	Mauritius
Malta	Nepal	Saint Lucia	Mayotte
Moldova	North Korea	Saint Pierre and Miquelon	Moçambique
Monaco	Oman	Saint Vincent and the Grenadines	Morocco
Montenegro	Pakistan	Saint-Barthélemy	Namibia
Netherlands	Palestine	Sint Maarten	Niger
Norway	Philippines	The Bahamas	Nigeria
Poland	Qatar	Trinidad and Tobago	Republic of the Congo
Portugal	Saudi Arabia	Turks and Caicos Islands	República Democrática de São Tomé e Príncipe
Romania	Singapore	U.S. Virgin Islands	Reunion
Russia	South Korea	United States	Rwanda
San Marino	Sri Lanka		Saint Helena
Serbia	Syria		Senegal
Slovakia	Taiwan		Seychelles
Slovenia	Tajikistan		Sierra Leone
Spain	Thailand		Somalia
Svalbard and Jan Mayen	Turkmenistan		South Africa
Sweden	Turquia		South Sudan
Switzerland	United Arab Emirates		Suazilândia
Ukraine	Uzbekistan		Sudan
United Kingdom	Vietnam		Tanzania
Vatican City	Yemen		The Gambia
			Togo
			Tunisia
			Uganda
			Western Sahara
			Zambia
			Zimbabwe