Maestro Sensor Switch with Occupancy/ Vacancy Sensor

Lutron Electronics

Maestro Sensor Switch with Occupancy/ Vacancy Sensor

Traduzido pelo Google,

O interruptor do sensor de ocupação Lutron Maestro combina um

Switch Maestro com ocupação ou vaga infravermelha passiva

sensor. O sensor detecta o calor dos ocupantes em movimento

dentro de uma área para determinar se o espaço está ocupado.

Com base no feedback do sensor, o sensor de ocupação

O interruptor ajustará a carga de acordo.

Características
• Sensores infravermelhos passivos com tecnologia Lutron XCT exclusiva
para detecção de movimento fino
• Campo de visão do sensor de 180°
• Movimento principal de até 30 pés x 30 pés (9 m x 9 m) [900 pés2 (81 m2)]
cobertura e 20 pés x 20 pés (6 m x 6 m) [400 pés2 (36 m2)] menor
cobertura de movimento
• A versão de ocupação pode ser definida como Auto-ON/Auto-OFF ou
Ligação manual/desligamento automático
• Versão da vaga disponível para atender aos requisitos do CA Title 24
• Tempo limite ajustável (1, 5, 15 ou 30 minutos) e alto/baixo
ajuste de sensibilidade
• Tipos de carga: incandescente, halógena, ELV, MLV, CFL, LED,
fluorescente magnética, fluorescente eletrônica e ventilador.

Especificação

Specifications
Regulatory Approvals
• UL® Listed to U.S. and Canadian safety
requirements.
• NOM Certification (MS- models only).
Power
• 120 V~ 50/60 Hz*
• 120–277 V~ 50/60 Hz*
Key Design Features
• All lighting loads
• Crush/tamper resistant lens
• Smart ambient light detection
• Adaptive switching algorithm for extended relay life
• XCT Technology for fine motion detection
• Lutron patented Softswitch
Environment
• Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%–90% humidity, non-condensing.
Indoor use only.
Warranty
• 5-Year Limited Warranty. For additional Warranty
information, please visit
www.lutron.com/TechnicalDocumentLibrary/Sensor_
Warranty.pdf
Additional Information
• When using MS-OPS2, MS-OPS5M,
MS-OPS6M2-DV, MS-VPS2, MS-VPS5M, or
MS-VPS6M2-DV on GFI-controlled circuits, please
see Lutron P/N 048440 on www.lutron.com
• For Maestro Occupancy sensing dimmer models,
please see Lutron P/N 369270 on www.lutron.com
• For use with MA-AS, MSC-AS, MA-AS-277, or
MSC-AS-277 to control the load from more than two
locations, please see Lutron P/N 048435 on
www.lutron.com
• For more information, please see
www.lutron.com/occvacsensors
• Lutron Customer Assistance: 1.844.LUTRON1

Advanced Features
Switching
• Standard zero cross—maximizes relay life by
switching at the point of minimum energy on the AC
power curve
• Adaptive zero cross—maximizes relay life by
switching at the point of minimum energy on the
AC power curve. Actively adapts to variations in
relay timing
• Lutron Patented Softswitch circuit—eliminates arcing
at mechanical contacts when loads are switched.
Extends relay life to an average of 1,000,000 cycles
(on/off) for resistive, capacitive, or inductive sources
XCT Technology
Advanced sensing technology for fine motion
detection ensures that the lights stay on while the
room is occupied, and that the sensor does not turn
on falsely when there is no occupancy in the room.
For more information, see
www.lutron.com/TechnicalDocumentLibrary/
white%20paper%20XCT%204-23-09%20B.pdf