Opublikuj swoje produkty
Commercial Glass Aluminum Doors Model 451
Wayne Dalton

Commercial Glass Aluminum Doors Model 451

Wayne Dalton’s Aluminum Full-View doors are the preferred choice when visibility and light transmission are just as important as aesthetics. These doors are weather resistant and virtually maintenance free, and are ideal for commercial applications such as auto dealerships, car washes, and restaurant patios.

With a variety of finish and glass options, our Full-View Commercial Aluminum Glass Doors help create a pleasant interior environment while offering a warm and open look from the exterior.

Model 451 is available in the Central and Eastern regions of the United States. Please see your Wayne Dalton dealer for more information.

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

Opis
  • Key Product Features

    • Max Width: 22’2” (6,705.6mm)
    • Max Height: 16’1” (4,902.2mm)
    • Door Assembly: Stile and rail assembly of aluminum alloy 6063-T6, 1 3/8" thick stiles and rails, joined with self tapping screws.
    • Air Infiltration: Meets IECC® requirements for air infiltration with 3rd party tested values below 0.4 cfm/ft2.
    • Rails: Top and bottom rails with 3 1/2" wide, lower intermediate rail 1 3/8", upper rail 1 5/8", minimum wall thickness 0.062".
    • Stiles: Single end stiles are 3 1/2" wide, center stile 3" wide, minimum wall thickness 0.062".
    • Springs: 10,000 cycles
    • Glazing: 1/8" (3mm) in 9 options, 1/4" (6mm) in 5 options, 1/2" (13 mm) in 4 options, 5/8" (16 mm) in 3 options.
    • Finish: Clear anodized
    • Wind Load: Provide to meet the design/performance requirements specified.
    • Lock: Interior mounted slide lock.
    • Weatherstripping: Flexible bulb-type strip at bottom section.
    • Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
    • Manual Operation: Pull rope or chain hoist
    • Electric Motor: Provide UL listed electric operator, equal to Genie Commercial Operators, size and type as recommended by manufacturer to move door in either direction at not less than 2/3 foot or more than 1 foot per second.

    Door Construction

    • Commercial Aluminum Glass Doors
    • Aluminum glazing stop
    • Large glass panels allow maximum light and visibility
    • 1-3/8” thick section with special reinforcing design
    • Vinyl seal between sections
    • 2-1/4” integrated reinforcing rib on upper intermediate rail for doors 10’3” wide and over
    • Aluminum panels that match the rail color are available.
    • Flexible vinyl bottom door seal
Specyfikacja techniczna
  • Nr referencyjnycommercial-aluminum-glass-doors-model-451
  • Rodzina produktuCommercial Doors
  • Grupa produktuSectional Doors
  • TypObiekt (jeden obiekt)
  • Data publikacji2023-08-17
  • Numer edycji1
Dodatkowe informacje
  • Materiał głównyAluminium
  • Materiał dodatkowySzkło
  • Zaprojektowano wStany Zjednoczone
  • Wyprodukowano wStany Zjednoczone
Klasyfikacja
  • Kategoria BIMobjectDrzwi - Bramy przemysłowe
  • Klasyfikacja IFCDrzwi
  • CSI MasterFormat 2014 Code08 36 13
  • CSI MasterFormat 2014 TitleSectional Doors
  • OmniClass Number23-17 11 13 25 13
  • OmniClass TitleSectional Overhead Metal Doors

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze