Opublikuj swoje produkty
Wilshire Planters, Aluminum Rectangle & Square
Wilshire Planters, Aluminum Rectangle & Square
    Tournesol

    Wilshire Planters, Aluminum Rectangle & Square

    Wilshire planters, our most popular collection, are available in powder-coated marine-grade aluminum. Aluminum is a great choice for planters. It is lightweight, adding less to the overall load. It is easier to deliver, assemble, and complete installation. It’s also environmentally friendly, requiring less energy to produce, build, and recycle.

    Features

    • 100% recyclable marine-grade aluminum
    • Same strength as Wilshire Steel but weighs 40-60% less
    • Engineered for strength with welded stiffeners
    • Laser-cut & welded for consistent thickness and edge detail at any scale
    • Powder-coat over zinc-free epoxy primer

    Product Options

    Tournesol’s products are made-to-order. To easily add features to our planters, check our menu of standard options.  Note -  not all options are available for all products; we also have capabilities beyond the listed options. For something off-menu, speak to a Tournesol Advisor.

    Opis
    • Guide Specification Section 

      129300 Site Furnishings Section
      129200
      Interior Planters
      Tournesol Site
      works Wilshire Aluminum Planters

      1.0 GENERAL 

      1.1 WORK INCLUDED 

      A. Provision of Aluminum planters

      1.2 RELATED WORK

      A. Section 033000 Cast-in-Place concrete
      B. Section 129233 Interior Planters
      C. Section 129333 Manufactured Planters
      D. Section 329433 Planters
      E. Section 129300 Site Furnishings 

      1.3 SUBMITTALS
      A. Product Data: Manufacturer's standard catalog cut sheets.
      B. Samples: As required for color selection or material thickness only.
      C. Shop Drawings: For custom applications, showing critical sizes and dimensions for installation and integration with other work. 

      1.4 DELIVERY, STORAGE AND HANDLING
      A. Unwrap and inspect planters after delivery for signs of damage during transit.
      B. Protect planters from damage during storage and handling.
      C. Store planters indoors if possible. Do not stand or walk on planters.
      D. Planter can be lifted by provided holes in corners of side wall structural supports. Lift only 6” off ground. Planter not to be loaded when mobilizing.

      1.5 PROJECT CONDITIONS
      A. Contractor to provide adequate structural support for planters. Unless otherwise specified, planters should have continuous basal support.
      B. Protect units from damage by adjacent work.

      1.6 WARRANTY
      A. Product will be free from defects in material and/or workmanship for a period of 3 years from invoice date
      B. Warranty does not apply to damages from alteration, misuse, or installation damage
      C. Normal use of these products may result in scratches, nicks, and dents. These are considered normal wear and tear, and are not the responsibility of the manufacturer
      D. Tournesol Siteworks will, at its option repair, replace, or refund the purchase price of products that are deemed defective by an authorized Tournesol Siteworks representative.

      2.0 PRODUCTS
      2.1 ACCEPTABLE PRODUCTS/MANUFACTURERS
      A. Wilshire Aluminum Planters, manufactured by Tournesol Siteworks LLC. 2930 Faber St., Union City, CA 94587 Tel: (800) 542-2282 FAX (510) 471-6243

      2.2 WILSHIRE ALUMINUM PLANTERS
      A. Materials -
      1. Aluminum – ASTM B209 – B5052-H32 Marine Grade 1/8” Aluminum sheet, formed and laser welded. Wall reinforcement elements of same material welded as required. The entire product is aluminum construction
      B. Construction –
      Planter bodies to be formed and fully laser welded at vertical seams. Top lips, where applicable, to be press broke, seam laser welded. Floor fully welded for a water-tight to body. Floor may be welded with 2” toe kick/reveal, or flush to bottom. Planters delivered with 1-5/8” drain holes unless specified otherwise.
      C. Performance characteristics –planter wall panels will not deform more than L/300 when loaded with 90 lbs/cu ft. soil media.
      D. Finish: specified finish; factory finished.
      1. Aluminum –
      a.: Following fabrication planter shall be cleaned by dry steam cleaning and zirconium solution. Corrosion-resistant zinc-free epoxy primer shall be applied, 1-2mils thick. Protective powder coat shall be polyester or polyester TGIC powder, minimum 4 mils thick. Following application parts shall be baked until properly cured.
      E. Sizes: Modular units fabricated to size by manufacturer as required to fill specified areas. Refer to catalog for standard sizes. Custom sizes as per approved shop drawings.

      2.3 PLANTER OPTIONS

      A. Drainage holes factory drilled as standard prior to delivery. Planters without drain holes need to be specified
      B. Scoop connections – adjacent planter walls may be lowered to allow multiple modular units appear to be one continuous unit. Optional connection kits also available, contact manufacturer prior to ordering
      C. Standard accessory pockets are available for standard lighting and junction boxes. Custom Accessory pockets available for audio, electrical, or other elements. Submit sample of specified housing with order, confirm size and location on shop drawings.
      D. Casters available for most small- and medium-sized planters, using polyurethane wheels. Non-locking casters recessed in planter, bottom of skirt approx.1/2” from surface.
      E. Cantilevered bench – Contact manufacturer for size and installation requirements

      3.0 EXECUTION

      3.1 PREPARATION
      A. Prior to planter fabrication, the contractor shall verify as-built dimensions of planter area or receptacles to ensure proper size, fit and quantity required.

      3.2 INSTALLATION
      A. Install planters to allow for easy removal if necessary. B. Provide continuous basal support. C. Install level to permit adequate drainage and irrigation.

    Specyfikacja techniczna
    • Nr referencyjnywilshire-planters-powder-coated-aluminum-rectangle-and-square
    • Rodzina produktuWilshire Collection
    • Grupa produktuWilshire Metal Planters
    • TypObiekt (jeden obiekt)
    • Data publikacji2024-04-30
    • Numer edycji1
    Dodatkowe informacje
    • Materiał głównyAluminium
    • Zaprojektowano wStany Zjednoczone
    • Wyprodukowano wStany Zjednoczone
    Klasyfikacja
    • Kategoria BIMobjectArchitektura krajobrazu - Krajobraz - pozostałe

    Dostępny w krajach:

    Europa Ameryka północna Azja Ameryka Południowa
    Albania
    Anguilla
    Armenia
    Argentyna
    Andora
    Antigua i Barbuda
    Azerbejdżan
    Boliwia
    Austria
    Aruba
    Bangladesz
    Brazylia
    Belgia
    Bahamy
    Bhutan
    Chile
    Białoruś
    Barbados
    Brunei Darussalam
    Ekwador
    Bośnia i Hercegowina
    Belize
    Brytyjskie Terytorium Oceanu Indyjskiego
    Falklandy (Malwiny)
    Bułgaria
    Bermudy
    Chiny
    Gujana
    Chorwacja
    Brytyjskie Wyspy Dziewicze
    Filipiny
    Gujana Francuska
    Cypr
    Curaçao
    Gruzja
    Kolumbia
    Czarnogóra
    Dominika
    Hongkong
    Paragwaj
    Czechy
    Dominikana
    Indie
    Peru
    Dania
    Grenada
    Indonezja
    Surinam
    Estonia
    Grenlandia
    Japonia
    Urugwaj
    Finlandia
    Gwadelupa
    Kambodża
    Wenezuela
    Francja
    Gwatemala
    Kazachstan
    Gibraltar
    Haiti
    Kirgistan
    Grecja
    Holandia Karaibska
    Korea Północna
    Guernsey
    Honduras
    Korea Południowa
    Hiszpania
    Jamajka
    Laos
    Holandia
    Kajmany
    Makau
    Irlandia
    Kanada
    Malediwy
    Islandia
    Kostaryka
    Malezja
    Jersey
    Kuba
    Mongolia
    Liechtenstein
    Martynika
    Myanmar (Birma)
    Litwa
    Meksyk
    Nepal
    Łotwa
    Montserrat
    Pakistan
    Luksemburg
    Nikaragua
    Singapur
    Macedonia Pólnocna
    Panama
    Sri Lanka
    Malta
    Portoryko
    Tadżykistan
    Man
    Saint Kitts i Nevis
    Tajlandia
    Mołdawia
    Saint Lucia
    Tajwan
    Monako
    Saint Martin
    Turkmenistan
    Niemcy
    Saint Vincent i Grenadyny
    Uzbekistan
    Norwegia
    Salwador
    Wietnam
    Polska
    Sint Maarten
    Wyspa Bożego Narodzenia
    Portugalia
    Stany Zjednoczone
    Wyspy Kokosowe
    Rosja
    Trynidad i Tobago
    Rumunia
    Turks i Caicos
    San Marino
    Wspólnota Saint-Barthélemy
    Serbia
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Słowacja
    Wyspy Dziewicze
    Słowenia
    Svalbard
    Szwajcaria
    Szwecja
    Ukraina
    Watykan
    Węgry
    Wielka Brytania
    Włochy
    Wyspy Alandzkie
    Wyspy Owcze