CaptiveAire

Heat & Condensate Exhaust Only Vent Hood, VH1 Series

Name: Heat & Condensate Exhaust Only Vent Hood, VH1 Series
Rating: 3.6 (5 reviews)

3.6(5 reviews)

VH1 Series

Heat & Condensate Exhaust Hood
The VH1 Series is a Type II, Exhaust Only Hood to be used over equipment not producing grease laden vapors. Type II hoods are used for condensation or heat removal applications.

ADVANTAGES

Superior Exhaust Flow Rates:
Construction: Single wall type hood fabricated of Type 304 stainless steel, #3 or #4 polish, on all exposed surfaces when used in condensate applications. Type 430 stainless steel, #3 or #4 polish available when used for heat applications. Pre-punched hanging angles on each end of hood. Additional set provided for hoods longer than 12'.
Condensate Applications: Integral 4-sided perimeter gutter and one drain standard for high-moisture exhaust.
Optional Double Wall Front: Used when switches are needed on the face of the hood. Mechanical baffle provides a built-in wiring chase for optimal positioning of electrical controls and outlets on the front face of the hood.
Optional Make-Up Air: Up to 80% make-up air can be supplied through optional front and/or side plenums (PSP Accessory).
Optional Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.

PERFORMANCE
ConfigurationLight Load Exhaust CFM/ftHeavy Load Exhaust CFM/ftWall & 1-piece island 100 150

CERTIFICATIONS
The VH1 Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models VH1 are ETL Listed under file number 3186625SAT-001 and complies with UL710, ULC710 and ULC-S646 Standards.

Specyfikacja techniczna

Nr referencyjnycaptiveaire-040
Rodzina produktuHVAC
Grupa produktuHood and Ventilation Equipment
TypObiekt (jeden obiekt)
Data publikacji2012-09-26
Numer edycji1

Linki

Url produktuhttp://www.captiveaire.com/catalogcontent/hoods/vh/index.asp?catid=182

Dodatkowe informacje

Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectHVAC - Wentylacja mechaniczna
Uniclass 2015 CodeSs_65_40_33_51
Uniclass 2015 DescriptionMechanical supply ventilation systems
CSI MasterFormat 2014 Code23 00 00
CSI MasterFormat 2014 TitleHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass Number23-33 00 00
OmniClass TitleHVAC Specific Products and Equipment
CSI UniFormat II CodeD30
CSI UniFormat II TitleHVAC

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze