GTS - MECHANICAL REBAR SPLICING SYSTEM
Tecnaria

GTS - MECHANICAL REBAR SPLICING SYSTEM

COMPOSITION Square section splicing with a central threaded hole housing the ends of the bars to be joined. High-strength steel nails mounted on plastic supports to be inserted in the appropriate holes by means of special hydraulic pliers. Central inspection hole to verify the correct positioning of the bars. Identification of the piece with technical mark, production batch and diameter of the bar to be joined.
Spesifikasjon
  • Axial joint for GTS bars in electrolytically galvanized C45 steel, square section, with central threaded hole, for the mechanical joining of reinforcement rods with diameter 8, 10 and 12 mm, by means of 5 mm diameter nails in high strength galvanized steel inserted in the relevant holes by means of special hydraulic pliers.
Tekniske spesifikasjoner
  • Unik ref.GTS
  • ProduktfamilieMechanical rebar splicing system
  • ProduktgruppeReinforcement of reinforced concrete columns
  • TypeMontering (flere objekter)
  • Utgivelsesdato2020-06-15
  • Utgavenummer1
  • Høyde (mm)20
  • Bredde (mm)90
  • Dybde (mm)20
Relatert
  • HovedmaterialeStål
  • Sekundært materialeStål
  • Designet iItalia
  • Produsert iItalia
  • Nettovekt (kg)0.23
Klassifisering
  • BIMobject kategoriByggematerialer - Forsterkning
  • IFC-klassifiseringStrukturell tilkobling
  • Uniclass 2015 kodePr_20_96_71
  • Uniclass 2015 beskrivelseReinforcement
  • OmniClass-nummer23-13 31 21 11
  • OmniClass-tittelReinforcement Components

Tilgjengelighet etter region

Europa Afrika
Albania
Algerie
Belgia
Kapp Verde
Bosnia-Hercegovina
Libya
Bulgaria
Marokko
Danmark
Tunisia
Finland
Frankrike
Hellas
Irland
Italia
Kroatia
Luxemburg
Malta
Moldova
Monaco
Montenegro
Nederland
Norge
Østerrike
Polen
Portugal
Romania
San Marino
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Sveits
Sverige
Tsjekkia
Tyskland
Ungarn
Vatikanstaten