CD60GS (GENSET) Damper

Name: CD60GS (GENSET) Damper
Rating: 4.2 (5 reviews)

4.2(5 reviews)

High-performance Galvanized Steel Airfoil Blade Damper AMCA Class IA Leakage Rated (GENSET)

The CD60GS is designed to provide maximum combustion air and pressure relief quickly for emergency generator start up to avoid damage of equipment orsurrounding space. The factory mounted fast-acting 8-second spring open actuatorprovides optimal performance and reliability. The CD60GS also provides AMCA class 1A leakage rating of 3cfm/ft2 at 1” w.g. when blades are closed to meet requirements of the International Energy Conservation Code (IECC).

Spesifikasjon

Furnish and install, at locations shown on plans, low leakage airfoil control dampers meeting the following minimum construction standards. Control dampers shall be produced in an ISO9001 certified factory. Frame shall be one-piece uniframe construction of 16 ga. (1.6) galvanized steel roll formed hat channel structurally equivalent to a minimum 13 ga. (2.4) frame. Blades shall be 14 ga. (2.0) equivalent galvanized steel, rollformed airfoil type for low pressure drop and low noise generation. Blade edge seals shall be Santoprene TPV type or equivalent mechanically locked into the blade edge.
Adhesive or clip-on type seals are unacceptable. Jamb seals shall be stainless steel chambered compression type to prevent leakage between blade end and damper frame. Blade end overlapping frame is unacceptable. Multiple section dampers must have factory installed jackshafts unless clearly eliminated by engineer. Bearings shall be 304 stainless steel, oil impregnated, and self-lubricating sleeve type with a 450 pound (204 kg) minimum radial crush load. Bearings shall turn in extruded holes in the damper frame. Axles shall be hexagonal positively locked into the damper blade.
Linkage shall be concealed out of airstream, within the damper frame to reduce pressure drop and noise. Temperature limits shall be -72°(-58°C) to +275°F (+135°C). Submittal must include leakage, maximum air flow and maximum pressure ratings based on AMCA Publication 500. Damper shall be tested and licensed in accordance with AMCA 511 for Air Performance and Air Leakage. Damper widths from 12” to 48” (305 to 1219) wide shall not leak any greater than 3 cfm/sq.ft. at 1” w.g. (15.2 l/s-m2
at .25 kPa). Damper shall be factory equipped with fast acting 8-second spring return electric actuator with 40,000 open/closed cycle testing, and shall be equivalent in all respects to Ruskin Model CD60GS.

Tekniske spesifikasjoner

Unik ref.CD60GS
ProduktfamilieDampers for Air Ductwork
ProduktgruppeCommercial Control Dampers
TypeObjekt (enkelt objekt)
Utgivelsesdato2022-07-28
Utgavenummer1

Lenker

Produktets nettadressehttps://www.ruskin.com/model/cd60gs-genset
Teknisk beskrivelsehttps://www.ruskin.com/doc/Id/9866
Anbudsinformasjonhttps://www.ruskin.com/doc/Id/10091

Relatert

Hovedmaterialegalvanisert stål
Designet iUSA
Produsert iUSA

Klassifisering

BIMobject kategoriVVS - Kanaler
IFC-klassifiseringSpjeld
UNSPSC-navnVentilation dampers
UNSPSC-kode40101504
Uniclass 2015 kodePr_65_65_24
Uniclass 2015 beskrivelseDuct dampers
CSI MasterFormat 2014 kode23 09 13.43
CSI MasterFormat 2014 tittelControl Dampers
OmniClass-nummer23-33 29 00
OmniClass-tittelHVAC Dampers
CSI UniFormat II kodeD3090
CSI UniFormat II tittelOther HVAC Systems & Equipment

Tilgjengelighet etter region

Europa	Asia	Nord Amerika	Afrika	Sør Amerika	Oceania
Åland	Afghanistan	Anguilla	Algerie	Argentina	Amerikansk Samoa
Albania	Armenia	Antigua og Barbuda	Angola	Bolivia	Australia
Andorra	Aserbajdsjan	Aruba	Benin	Brasil	Cookøyene
Belgia	Bahrain	Bahamas	Botswana	Chile	Fiji
Bosnia-Hercegovina	Bangladesh	Barbados	Burkina Faso	Colombia	Fransk Polynesia
Bulgaria	Bhutan	Belize	Burundi	Ecuador	Guam
Danmark	Brunei	Bermuda	Den demokratiske republikken Kongo	Falklandsøyene (Malvinas)	Kiribati
Estland	Christmas Island	Canada	Den sentralafrikanske republikk	Fransk Guyana	Marshalløyene
Færøyene	De forente arabiske emirater	Cayman Islands	Djibouti	Guyana	Mikronesiaføderasjonen
Finland	Det britiske territoriet i Indiahavet	Costa Rica	Egypt	Paraguay	Nauru
Frankrike	Filippinene	Cuba	Ekvatorial-Guinea	Peru	New Zealand
Gibraltar	Georgia	Curaçao	Elfenbenskysten	Surinam	Niue
Guernsey	Hongkong	Den dominikanske republikk	Eritrea	Uruguay	Nord-Marianene
Hellas	India	Dominica	Eswatini	Venezuela	Norfolkøyene
Hviterussland	Indonesia	El Salvador	Etiopia		Ny-Caledonia
Irland	Irak	Grenada	Gabon		Øst-Timor
Island	Iran	Grønland	Gambia		Palau
Isle of Man	Israel	Guadeloupe	Ghana		Papua Ny-Guinea
Italia	Japan	Guatemala	Guinea		Pitcairn
Jersey	Jemen	Haiti	Guinea-Bissau		Salomonøyene
Kroatia	Jordan	Honduras	Kamerun		Samoa
Kypros	Kambodsja	Jamaica	Kapp Verde		Tokelau
Latvia	Kasakhstan	Jomfruøyene	Kenya		Tonga
Liechtenstein	Kina	Jomfruøyene	Komorene		Tuvalu
Litauen	Kirgisistan	Karibisk Nederland	Kongo		United States Minor Outlying Islands
Luxemburg	Kokosøyene	Martinique	Lesotho		Vanuatu
Malta	Kuwait	Mexico	Liberia		Wallis og Futuna
Moldova	Laos	Montserrat	Libya
Monaco	Libanon	Nicaragua	Madagaskar
Montenegro	Macao	Panama	Malawi
Nederland	Malaysia	Puerto Rico	Mali
Nord-Makedonia	Maldivene	Saint Kitts og Nevis	Marokko
Norge	Mongolia	Saint Lucia	Mauritania
Østerrike	Myanmar (Burma)	Saint Pierre og Miquelon	Mauritius
Polen	Nepal	Saint Vincent og Grenadinene	Mayotte
Portugal	Nord-Korea	Saint-Barthélemy	Mosambik
Romania	Oman	Saint-Martin	Namibia
Russland	Pakistan	Sint Maarten	Niger
San Marino	Palestina	Trinidad og Tobago	Nigeria
Serbia	Qatar	Turks- og Caicosøyene	Réunion
Slovakia	Saudi-Arabia	USA	Rwanda
Slovenia	Singapore		Sankt Helena
Spania	Sør-Korea		São Tomé og Príncipe
Storbritannia	Sri Lanka		Senegal
Svalbard og Jan Mayen	Syria		Seychellene
Sveits	Tadsjikistan		Sierra Leone
Sverige	Taiwan		Somalia
Tsjekkia	Thailand		Sør-Afrika
Tyskland	Turkmenistan		Sør-Sudan
Ukraina	Tyrkia		Sudan
Ungarn	Usbekistan		Tanzania
Vatikanstaten	Vietnam		Togo
			Tsjad
			Tunisia
			Uganda
			Vest-Sahara
			Zambia
			Zimbabwe