Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers
Ashby Ceiling Loudspeakers

    Ashby Ceiling Loudspeakers

    The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

    Features & Benefits

    • Self-powered
    • Easy to install
    • Extremely wide and consistent coverage
    • Ultra low distortion
    • Exceptional SPL-to-size ratio
    • Beautiful low frequency response and reproduction of speech and music
    • Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

    Applications

    • Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
    • Constellation acoustic systems
    Spesifikasjon
    • Ceiling Loudspeaker: Ashby 5C

      The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.

      Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.

      The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.

      The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.

      The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).

      Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).

      Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).

      The loudspeaker shall be the Meyer Sound Ashby-5C

      Ceiling Loudspeaker: Ashby 8C
      The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.

      Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.

      The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.

      The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.

      The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.

      The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).

      Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).

      Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).

      The loudspeaker shall be the Meyer Sound Ashby-8C. 

      Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

    Tekniske spesifikasjoner
    • Unik ref.meyersound-ashby
    • ProduktfamilieLoudspeakers
    • ProduktgruppeULTRA
    • TypeObjekt (enkelt objekt)
    • Utgivelsesdato2020-03-12
    • Utgavenummer2
    Relatert
    • HovedmaterialeAluminium
    • Designet iUSA
    • Produsert iUSA
    Klassifisering
    • BIMobject kategoriElektronikk - lyd elektronikk
    • IFC-klassifiseringObjekt
    • Uniclass 2015 kodePr_70_75_36_50
    • Uniclass 2015 beskrivelseLoudspeakers
    • CSI MasterFormat 2014 kode27 24 23
    • CSI MasterFormat 2014 tittelAudio-Video Devices
    • OmniClass-nummer23-37 15 29 11 13
    • OmniClass-tittelLoudspeakers

    Tilgjengelighet etter region

    Europa Asia Nord Amerika Afrika Sør Amerika Oceania
    Åland
    Afghanistan
    Anguilla
    Algerie
    Argentina
    Amerikansk Samoa
    Albania
    Armenia
    Antigua og Barbuda
    Angola
    Bolivia
    Australia
    Andorra
    Aserbajdsjan
    Aruba
    Benin
    Brasil
    Cookøyene
    Belgia
    Bahrain
    Bahamas
    Botswana
    Chile
    Fiji
    Bosnia-Hercegovina
    Bangladesh
    Barbados
    Burkina Faso
    Colombia
    Fransk Polynesia
    Bulgaria
    Bhutan
    Belize
    Burundi
    Ecuador
    Guam
    Danmark
    Brunei
    Bermuda
    Den demokratiske republikken Kongo
    Falklandsøyene (Malvinas)
    Kiribati
    Estland
    Christmas Island
    Canada
    Den sentralafrikanske republikk
    Fransk Guyana
    Marshalløyene
    Færøyene
    De forente arabiske emirater
    Cayman Islands
    Djibouti
    Guyana
    Mikronesiaføderasjonen
    Finland
    Det britiske territoriet i Indiahavet
    Costa Rica
    Egypt
    Paraguay
    Nauru
    Frankrike
    Filippinene
    Cuba
    Ekvatorial-Guinea
    Peru
    New Zealand
    Gibraltar
    Georgia
    Curaçao
    Elfenbenskysten
    Surinam
    Niue
    Guernsey
    Hongkong
    Den dominikanske republikk
    Eritrea
    Uruguay
    Nord-Marianene
    Hellas
    India
    Dominica
    Eswatini
    Venezuela
    Norfolkøyene
    Hviterussland
    Indonesia
    El Salvador
    Etiopia
    Ny-Caledonia
    Irland
    Israel
    Grenada
    Gabon
    Øst-Timor
    Island
    Japan
    Grønland
    Gambia
    Palau
    Isle of Man
    Jemen
    Guadeloupe
    Ghana
    Papua Ny-Guinea
    Italia
    Jordan
    Guatemala
    Guinea
    Pitcairn
    Jersey
    Kambodsja
    Haiti
    Guinea-Bissau
    Salomonøyene
    Kroatia
    Kasakhstan
    Honduras
    Kamerun
    Samoa
    Kypros
    Kina
    Jamaica
    Kapp Verde
    Tokelau
    Latvia
    Kirgisistan
    Jomfruøyene
    Kenya
    Tonga
    Liechtenstein
    Kokosøyene
    Jomfruøyene
    Komorene
    Tuvalu
    Litauen
    Kuwait
    Karibisk Nederland
    Kongo
    United States Minor Outlying Islands
    Luxemburg
    Laos
    Martinique
    Lesotho
    Vanuatu
    Malta
    Libanon
    Mexico
    Liberia
    Wallis og Futuna
    Moldova
    Macao
    Montserrat
    Libya
    Monaco
    Malaysia
    Nicaragua
    Madagaskar
    Montenegro
    Maldivene
    Panama
    Malawi
    Nederland
    Mongolia
    Puerto Rico
    Mali
    Nord-Makedonia
    Myanmar (Burma)
    Saint Kitts og Nevis
    Marokko
    Norge
    Nepal
    Saint Lucia
    Mauritania
    Østerrike
    Nord-Korea
    Saint Pierre og Miquelon
    Mauritius
    Polen
    Oman
    Saint Vincent og Grenadinene
    Mayotte
    Portugal
    Pakistan
    Saint-Barthélemy
    Mosambik
    Romania
    Palestina
    Saint-Martin
    Namibia
    Russland
    Qatar
    Sint Maarten
    Niger
    San Marino
    Saudi-Arabia
    Trinidad og Tobago
    Nigeria
    Serbia
    Singapore
    Turks- og Caicosøyene
    Réunion
    Slovakia
    Sør-Korea
    USA
    Rwanda
    Slovenia
    Sri Lanka
    Sankt Helena
    Spania
    Syria
    São Tomé og Príncipe
    Storbritannia
    Tadsjikistan
    Senegal
    Svalbard og Jan Mayen
    Taiwan
    Seychellene
    Sveits
    Thailand
    Sierra Leone
    Sverige
    Turkmenistan
    Somalia
    Tsjekkia
    Tyrkia
    Sør-Afrika
    Tyskland
    Usbekistan
    Sør-Sudan
    Ukraina
    Vietnam
    Sudan
    Ungarn
    Tanzania
    Vatikanstaten
    Togo
    Tsjad
    Tunisia
    Uganda
    Vest-Sahara
    Zambia
    Zimbabwe