Pasito Mini 1.1 - Outside Lighting

step light for outdoor applications
recessed (wall)
Power: 6W (230Vac), 5W (24Vdc)
Power supply: 24Vdc, 230Vac
Lumen output at source: 383 lm (3000K, CRI 80), 355 lm (3000K, CRI 90)
Delivered lumen output: 214 lm (3000K, asymmetrical 150°x90°, CRI 80), 195 lm (3000K, 60°, CRI 80), 186 lm (3000K, asymmetrical 150°x90°, CRI 90), 170 lm (3000K, 60°, CRI 90)
1 high-intensity power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 60° optical system consisting of a 60° hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum, asymmetrical 150°x90° optical system consisting of an asymmetrical hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum
CRI: 80, 90
Body material: body made of technopolymer with high resistance to impact and sub-zero temperatures, and heat sink made of aluminium to optimize heat dissipation
Finishes: cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
230Vac: built-in power supply unit, 24Vdc: power supply unit not included
230Vac version: includes 0.20 m neoprene cable, H05RN-F 2x1.00 Ø7 mm;  24Vdc version: includes 0.30 m neoprene cable, H05RN-F 2x0.35/0.75 Ø6.3 mm
Ingress protection: IP65
Impact resistance: IK06
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Photobiological safety: risk group 1 according to EN6 2471:2006
Appliance class: II (230Vac), III (24Vdc)
Weight: 300 g
Dimensions: 99x44x143 mm
Cutout dimensions: 85x125 mm
Energy efficiency class: A / A+ / A++
Accessories: WC1420 Outer casing for solid walls
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption