Control 50S/T Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System

Surface-Mount Subwoofer for Subwoofer-Satellite
Loudspeaker System
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

FEATURES

Full bandwidth 32 Hz – 20 kHz high fidelity sound
Selectable 70V/100V for distributed lines, or low impedance
Versatility for either two or four satellite speakers per system
Available in black or white

Keywords: Harman

Spesifikasjon

SPECIFICATIONS
Frequency Range (-10 dB) 32 Hz – 200 Hz
Frequency Response (±3 dB) 50 Hz – 150 Hz
Power Capacity 300 Watts Continuous Program Power (2 hrs)
150 Watts Continuous Pink Noise (2 hrs)
200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity
(2.83V, 1m) 95 dB (near corner), 89 dB (center of wall)
Rated Maximum SPL (1m) 115 dB average, 121 dB peak (near corner)
109 dB average, 115 dB peak (center of wall)
Nominal Impedance 8 ohms (in bypass/thru mode)
Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
Transducer Driver 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
Input Connectors Six removable locking 2-pin connectors with screw-down terminals.
Max wire 12 AWG (2.5 mm2)
Material Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
Dimensions (H x W x D) Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)
Wall Bracket: 15 mm (0.6 in) deep
Wall Bracket 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
Net Weight 9.0 kg (20 lbs)
Shipping Weight 10.2 kg (23 lbs)
Included Accessories Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.

Tekniske spesifikasjoner

Unik ref.Control-50S-T-Surface-Mount-Subwoofer-for-Satellite-Loudspeaker-System
ProduktfamilieInstalled Sound
ProduktgruppeSurface Mount Speakers
TypeObjekt (enkelt objekt)
Utgivelsesdato2019-06-22
Utgavenummer1

Lenker

Produktets nettadressehttp://www.jblpro.com/www/products/installed-sound/control-50-series/control-50s-t#.XC4hgVxKiUl
Monteringsanvisninghttp://www.jblpro.com/ProductAttachments/C50ST_Installation_Guide.pdf
Teknisk beskrivelsehttp://www.jblpro.com/ProductAttachments/Control50_SpecSheet.pdf

Relatert

Designet iUSA
Produsert iUSA

Klassifisering

BIMobject kategoriElektronikk - lyd elektronikk
IFC-klassifiseringObjekt
ETIM-kodeEC000682
ETIM-navnLoudspeaker set
UNSPSC-navnAudio and visual presentation and composing equipment
UNSPSC-kode4511
Uniclass 2015 kodePr_70_75_36_50
Uniclass 2015 beskrivelseLoudspeakers
CSI MasterFormat 2014 kode11 52 00
CSI MasterFormat 2014 tittelAudio-Visual Equipment
OmniClass-nummer23-37 15 29 11 13
OmniClass-tittelLoudspeakers

Tilgjengelighet etter region

Nord Amerika
Anguilla
Antigua og Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Cayman Islands
Costa Rica
Cuba
Curaçao
Den dominikanske republikk
Dominica
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA