6DS 6″ DOWNLIGHT – SQUARE

FEATURES

Wide range of lumen options for general illumination
Beam angles ranging from 25º narrow to 65º wide for tailored performance
Square shape accentuates architectural styles
New construction mounting pan, IC-rated, or pan-less remodel kit available
Open reflector with seven finishes complements any interior style
Die-cast trim choices include flush, regressed or angled lens
Contemporary design provides glare-free illumination for a soft ceiling appearance
Fully room-side accessible
Title 24 | JA8 compliant
Spring clip retention system eliminates trim sag
Easily adjust mounting arms below ceiling to adapt to a range of ceiling thicknesses
Low UGR meets LEED and WELL requirements
Deliver scalable, data-driven smart buildings with PoE-enabled fixtures and controls
Support human-centric design with adaptive, individualized lighting using tunable white light
Mimic the comfortable, welcoming glow of incandescent with warm-dimming technology
Buy American Act compliant
Wireless in-fixture control solutions available
Available with BIOS^® state-of-the-art LED white light circadian solutions
Made Right Here^® in the USA

Spesifikasjon

Housing	Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 2-1/4″.
Open Reflector	Low-iridescent anodized aluminum with top diffuser.
Lensed Trim	Die-cast aluminum frame with micro-prismatic, acrylic lens.
Electrical	High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours.
Mounting	Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. Minimum 24″ O.C. marked spacing required for L50 - L70 lumen packages.
Listings	• cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation. • Suitable for wet location under covered ceiling when specified with WET/CC option. • IC-rated for direct contact with insulation when specified with I Mounting Type. • City of Chicago Environmental Air approved when specified with CP option. • Complies with ASTM-E283 when specified with ATH option. • RoHS compliant. • Title 24 (JA8) compliant in select configurations, see www.cacertappliances.energy.ca.gov. • Complies with the Buy American Act and other federal regulations. Request certification at hew.com/baa.
Warranty	5-year limited warranty, see details

Tekniske spesifikasjoner

Unik ref.6ds-downlight-square
ProduktfamilieIndoor Luminaires
ProduktgruppeDownlights
TypeObjekt (enkelt objekt)
Utgivelsesdato2025-01-03
Utgavenummer1

Lenker

Produktets nettadressehttps://hew.com/products/6DS
Monteringsanvisninghttps://hew.com/instruction/4-6-inch-downlight_instructions.pdf
Produktsertifiseringhttps://hew.com/specifications/6DS_led.pdf

Relatert

HovedmaterialeMetall
Sekundært materialeGlass
Designet iUSA
Produsert iUSA

Klassifisering

BIMobject kategoriBelysning - Takmontert
IFC-klassifiseringlysarmaturen
Uniclass 2015 kodeEF_70_80
Uniclass 2015 beskrivelseLighting
CSI MasterFormat 2014 kode26 51 13
CSI MasterFormat 2014 tittelInterior Lighting Fixtures, Lamps, And Ballasts
OmniClass-nummer23-35 47 11
OmniClass-tittelLighting Fixtures

Tilgjengelighet etter region

Nord Amerika
Anguilla
Antigua og Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Cayman Islands
Costa Rica
Cuba
Curaçao
Den dominikanske republikk
Dominica
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA