DANOPOL DW HS 1.2
Danosa

DANOPOL DW HS 1.2

Synthetic PVC plasticized membrane, light blue, reinforced with polyester net carrier. Designed for drinkable water tanks waterproofing, U.V. resistant. ADVANTAGES AND BENEFITS: - Suitable for contact with food and drinking water, accredited by tests and thanks to the use of virgin and non recycled raw materials. - Excellent resistance to tearing. - High tensile strength. - High puncture resistance. - High dimensional stability. - Very good resistance to: microorganisms; putrefaction; natural aging, weathering, UV radiation and swollen. - Excellent flexibility. - Improves performance in mechanically fastened sheets. - Absorbs structural movements to resist the stresses. - Presents a good protection against mechanical damage. - Limit strains and tensions in the waterproofing membrane. - Very high durability with respect to possible degradation caused due to chemical type. - High adaptability to the different forms of support. SCOPE: - Waterproofing of water tanks (suitable for outdoors) acording the UE No 10/2011 regulation on plastic materials and articles intended to come into contact with food.
Spesifikasjon
  • TECHNICAL DATA: - Reaction to fire: E (EN 13501-1) - Longitudinal & transversal tensile strength: more than1000 N/50mm (EN 12311-2 Método A) - Longitudinal elongation at break: more than 15 % (EN 12311-2 Método A) - Transversal elongation at break: more than 15 % (EN 12311-2 Método A) - Longitudinal resistance to tearing (nail shank): more than 60 N (EN 12310-2) - Transversal resistance to tearing (nail shank): more than 50 N (EN 12310-2) - Overlaps resistance (Peeling of overlap): more than 40 N/50mm (EN 12316-2) - Overlaps resistance (Shear of overlaps): more than 300 N/50mm (EN 12317-2) - Flexibility at low temperature: less than -30 ºC (EN 495-5) - Resistance to root penetration: No performance determined (EN 13948) - Humidity resistance factor 20.000: ± 30% (m².s.Pa)/Kg (EN 1931) - Watertightness: Positive or correct (EN 1928 (B)) ADDTITIONAL TECHNICAL DATA: - Straightness: less than 50 mm (EN 1848-2) - Flatness: less than 10 mm (EN 1848-2) - Visible defects: Positive or correct (EN 1850-2) - Length: 20 m (EN 1848-2) - Width: 180 cm (EN 1848-2) - Nominal minimum thickness: 1.2 (-5; +10%) mm (EN 1849-2) - Mass: 1,5 (-5%; +10%) kg/m2 (EN 1849-2) - Longitudinal & transversal dimensional stability: less than 3.0 % (EN 1107-2) - Loss of plasticizers (mass change at 30 days): less than 4.5 % (EN ISO 177) - Loss of elongation at break (UV 5000 h): less than 10 % (EN 1297, EN 12311-2) PRESENTATION: - Reinforcement type: Polyester - Thickness: 1.2 mm - Width: 1.80 m - Length: 20 m - Roll surface: 36 m2 - Color: Light Blue - Product Code: 210078
Tekniske spesifikasjoner
  • Unik ref.danopol_dw_hs_12
  • ProduktfamilieSingle Ply Waterproofing
  • ProduktgruppePVC
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2019-03-14
  • Utgavenummer1
  • Høyde (mm)1800
  • Bredde (mm)20000
  • Dybde (mm)1.2
Relatert
  • Hovedmateriale PVC / Plast
  • Designet iSpania
  • Produsert iSpania
Klassifisering
  • BIMobject kategoriByggematerialer - Vanntetting
  • Uniclass 2015 kodeSs_32_80
  • Uniclass 2015 beskrivelseWaterproofing and tanking systems
  • CSI MasterFormat 2014 kode07 13 54
  • CSI MasterFormat 2014 tittelThermoplastic Sheet Waterproofing
  • OmniClass-nummer23-13 25 17 13 17
  • OmniClass-tittelThermoplastic Sheet Waterproofing
  • CSI UniFormat II kodeE10
  • CSI UniFormat II tittelEQUIPMENT

Tilgjengelighet etter region

Europa Asia Nord Amerika Afrika Sør Amerika Oceania
Åland
Afghanistan
Anguilla
Algerie
Argentina
Amerikansk Samoa
Albania
Armenia
Antigua og Barbuda
Angola
Bolivia
Australia
Andorra
Aserbajdsjan
Aruba
Benin
Brasil
Cookøyene
Belgia
Bahrain
Bahamas
Botswana
Chile
Fiji
Bosnia-Hercegovina
Bangladesh
Barbados
Burkina Faso
Colombia
Fransk Polynesia
Bulgaria
Bhutan
Belize
Burundi
Ecuador
Guam
Danmark
Brunei
Bermuda
Den demokratiske republikken Kongo
Falklandsøyene (Malvinas)
Kiribati
Estland
Christmas Island
Canada
Den sentralafrikanske republikk
Fransk Guyana
Marshalløyene
Færøyene
De forente arabiske emirater
Cayman Islands
Djibouti
Guyana
Mikronesiaføderasjonen
Finland
Det britiske territoriet i Indiahavet
Costa Rica
Egypt
Paraguay
Nauru
Frankrike
Filippinene
Cuba
Ekvatorial-Guinea
Peru
New Zealand
Gibraltar
Georgia
Curaçao
Elfenbenskysten
Surinam
Niue
Guernsey
Hongkong
Den dominikanske republikk
Eritrea
Uruguay
Nord-Marianene
Hellas
India
Dominica
Eswatini
Venezuela
Norfolkøyene
Hviterussland
Indonesia
El Salvador
Etiopia
Ny-Caledonia
Irland
Irak
Grenada
Gabon
Øst-Timor
Island
Iran
Grønland
Gambia
Palau
Isle of Man
Israel
Guadeloupe
Ghana
Papua Ny-Guinea
Italia
Japan
Guatemala
Guinea
Pitcairn
Jersey
Jemen
Haiti
Guinea-Bissau
Salomonøyene
Kroatia
Jordan
Honduras
Kamerun
Samoa
Kypros
Kambodsja
Jamaica
Kapp Verde
Tokelau
Latvia
Kasakhstan
Jomfruøyene
Kenya
Tonga
Liechtenstein
Kina
Jomfruøyene
Komorene
Tuvalu
Litauen
Kirgisistan
Karibisk Nederland
Kongo
United States Minor Outlying Islands
Luxemburg
Kokosøyene
Martinique
Lesotho
Vanuatu
Malta
Kuwait
Mexico
Liberia
Wallis og Futuna
Moldova
Laos
Montserrat
Libya
Monaco
Libanon
Nicaragua
Madagaskar
Montenegro
Macao
Panama
Malawi
Nederland
Malaysia
Puerto Rico
Mali
Nord-Makedonia
Maldivene
Saint Kitts og Nevis
Marokko
Norge
Mongolia
Saint Lucia
Mauritania
Østerrike
Myanmar (Burma)
Saint Pierre og Miquelon
Mauritius
Polen
Nepal
Saint Vincent og Grenadinene
Mayotte
Portugal
Nord-Korea
Saint-Barthélemy
Mosambik
Romania
Oman
Saint-Martin
Namibia
Russland
Pakistan
Sint Maarten
Niger
San Marino
Palestina
Trinidad og Tobago
Nigeria
Serbia
Qatar
Turks- og Caicosøyene
Réunion
Slovakia
Saudi-Arabia
USA
Rwanda
Slovenia
Singapore
Sankt Helena
Spania
Sør-Korea
São Tomé og Príncipe
Storbritannia
Sri Lanka
Senegal
Svalbard og Jan Mayen
Syria
Seychellene
Sveits
Tadsjikistan
Sierra Leone
Sverige
Taiwan
Somalia
Tsjekkia
Thailand
Sør-Afrika
Tyskland
Turkmenistan
Sør-Sudan
Ukraina
Tyrkia
Sudan
Ungarn
Usbekistan
Tanzania
Vatikanstaten
Vietnam
Togo
Tsjad
Tunisia
Uganda
Vest-Sahara
Zambia
Zimbabwe