ARDEX R 54™ Sealer System

Performance Sealer System for Stain & Wear Protection

Suitable Applications

For sealing ARDEX toppings.
For use in light industrial and commercial projects.
Suitable to receive rubber-wheeled forklift traffic.

Key Features

ARDEX R 54™ AP
Primer for ARDEX R 54 Performance Sealer for Stain & Wear Protection

For interior use on ARDEX toppings
Very fast drying; can receive ARDEX R 54 in only 3 hours or less
Excellent penetration and adhesion
Low VOC and no odor

ARDEX R 54™ SG
Performance Sealer for Stain & Wear Protection (High-Gloss Top Coat)

ARDEX R 54™ SM
Performance Sealer for Stain & Wear Protection (Matte Top Coat)

Available in high gloss and matte clear finishes
For interior use on ARDEX toppings
Performance sealer; gives ARDEX toppings higher gloss and increased abrasion and stain resistance while lowering maintenance costs
Low odor
Can be cleaned up with water

Spesifikasjon

Technical Data According to ARDEX Quality Standards
All data based on 70°F / 21°C. Physical properties are typical values and not specifications.
Sealer
Approximate Coverage*
First coat: 230 – 400 sq. ft. / gallon (5.6 – 9.8 sq. m / L)
Second coat: 400 – 450 sq. ft. / gallon (9.8 – 11 sq. m / L)
Dependent on surface profile, density and porosity.
Drying Time:
Dry to the touch (High Gloss): 4 – 12 hours
Dry to the touch (Matte): 3 – 5 hours
Light foot traffic: 24 hours
Full cure: 5 days
VOC: <1 g/L ASTM D 6886 (Calculated)
Packaging: One unit contains (1) 3 qt. / 2.84 L container (Part A) and (1) 1 qt. / 0.95 L container (Part B)
Storage: Store at temperatures between 40 and 90°F (5 – 32°C). Do not freeze.
Shelf Life: 1 year, if unopened and properly stored
Warranty: ARDEX L.P. Standard Limited Warranty applies. See ardexamericas.com/services/warranties for full warranty details.
Primer
Coverage: 300 – 450 sq. ft. / gallon (7.4 – 11 sq. m / L)
*Dependent on surface profile, density and porosity.
Drying Time: Dry to the touch: 20 minutes. Apply ARDEX R 54: 3 hours minimum; 24 hours maximum
VOC: <75 g/L ASTM D 6886 (Calculated)
Packaging: 1 gallon (3.78 L) Container
Storage: Store at temperatures between 40 and 90°F (5 – 32°C). Do not freeze.
Shelf Life: 1 year, if unopened and properly stored
Warranty: ARDEX L.P. Standard Limited Warranty applies. See ardexamericas.com/services/warranties for full warranty details.

Tekniske spesifikasjoner

Unik ref.ARDEX-r-54
ProduktfamilieARDEX Surfaces
ProduktgruppeSealers & Densifiers
TypeObjekt (enkelt objekt)
Utgivelsesdato2024-02-21
Utgavenummer1

Lenker

Produktets nettadressehttps://www.ardexamericas.com/product/ardex-r-54-sealer-system/
Instruksjonsvideohttps://youtu.be/E-D3_cNVoDo
Teknisk beskrivelsehttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2022/09/ARDEX-R-54-Product-Overview.pdf

Klassifisering

BIMobject kategoriGulv - Underlag
IFC-klassifiseringFloor
UNSPSC-navnCarpet or rug underlays
UNSPSC-kode30161719
Uniclass 2015 kodePr_35_31_06_80
Uniclass 2015 beskrivelseSmoothing and levelling underlay compounds
CSI MasterFormat 2014 kode06 16 26
CSI MasterFormat 2014 tittelUnderlayment
OmniClass-nummer23-15 17 11 13 11 13
OmniClass-tittelPortland Cement Floor Underlayments
CSI UniFormat II kodeB1010
CSI UniFormat II tittelFloor Construction

Tilgjengelighet etter region

Nord Amerika
Anguilla
Antigua og Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Cayman Islands
Costa Rica
Cuba
Curaçao
Den dominikanske republikk
Dominica
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA