Safety equipment
New safety light grille with soft stop, IP 67, max. 2500 mm high for monitoring the closing zone (acc. to DIN EN 13241-1) with a beam distance of only 45 mm.
Door leaf
Material: impact-resistant 1.5 mm thick polycarbonate sections
Divided by aluminium profiles
Section height 550 mm
Up to 90% door leaf transparency
Construction
Multi-part side guides made of canted, galvanized steel
with integrated, and thus protected, safety light grille for monitoring
the door closing zone. Optimum sealing of the door leaf to the side elements
by special seals integrated into the side elements.
The spiral bracket ensures secure, non-contact and
low-wear winding.
The additional counter weights in the door side elements ensure quiet door travel at the highest speeds in combination with the lowest material wear.
Operator
Operator with spur gear level and electromagnetic brake, integral catch safety device,
digital limit switch. Motor power 1.8 kW, connecting voltage 400 V,
50 Hz, protection category IP 54. Free choice of right or left arrangement of the operator on order.
Control
3-phase frequency converter control AK 500 FUE 1
in the plastic control box, IP 65, 3-phase, 400 V,
size (W × H × D) = 230 × 460 × 200 mm,
frequency converter, electronic travel limit setting,
“Open-Stop-Close” membrane push button and emergency-off,
automatic timer and display.
Connection cable with CEE plug.
Emergency opening / emergency closing
Emergency hand chain
The design of the high-speed rolling shutter complies with DIN EN 13241-1 and
is EPD (Environmental Product Declaration) certified according to ISO 14025 and
EN 15804.
Areas of application:
Industrial halls, warehouses, underground garages, material processing, area separation
4.5 (20)
