Publiceer je producten
ARDEX ERM - Exterior Ramp Mortar
ARDEX ERM - Exterior Ramp Mortar
    ARDEX

    ARDEX ERM - Exterior Ramp Mortar

    ARDEX ERM™ Exterior Ramp Mortar is a trowel-grade, polymer-modified Portland cement-based, structural repair mortar for deteriorated exterior and interior concrete above, on or below grade. It has a corrosion inhibitor built-in to protect reinforcing steel. Key Features Integral corrosion inhibitor Easy to apply Mixes with water only Installs from 1/4” – 2” (6 mm – 5.1 cm) neat and up to 8” (20.3 cm) when extended with aggregate Freeze-thaw resistant Suitable for normal service commercial, institutional and multi-unit residential applications Use for exterior and interior concrete repair
    Specificatie
    • Installation
      Mixing Ratio: 6 1/2 pints (3.08 L) of water per 55 lb. (25 kg) bag
      Coverage: 0.46 cu. ft. per 55 lb. bag (0.01 m3 per 25 kg bag); 22 sq. ft. per 55 lb. bag at 1/4”; (2.04 m2 per 25 kg bag at 6 mm)

      Performance
      Compressive Strength (ASTM C109): 7 days 7000 psi; 490 kg/sq. cm; 28 days 8200 psi; 574.0 kg/sq. cm
      Flexural Strength (ASTM C293): 7 days 1200 psi; 84 kg/sq. cm; 28 days 1500 psi; 105 kg/sq. cm
      Modulus of Elasticity ASTM C469): 28 days 3.67 x 106 psi; 2.6 x 105 kg/sq. cm
      Length Change (ASTM C157): 7 days 0.06%; 28 days 0.08%
      Rapid Chloride Permeability (ASTM C1202, 28 days): 820 coulombs
      Pot Life / Working Time: 25 – 45 minutes
      Time to Traffic: Light foot 2 – 4 hours; Normal foot 3 days; Full, including rolling loads 5 – 7 days
      Coat or Seal (Minimum): 3 – 7 days
      Color: Gray
      Packaging: 55 lb. (25 kg) bag
      Storage: Store in a cool dry area. Do not leave bags exposed to direct sunlight. Keep from freezing.
      Shelf Life: 1 year, if unopened.
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

    Technische specificatie
    • Unieke ref.ARDEX-ERM
    • ProductfamilieConcrete Repair
    • ProductgroepExterior Ramp Mortar
    • TypeObject (enkelvoudig object)
    • Publicatiedatum2019-11-07
    • Editienummer1
    Gerelateerd
    • Ontworpen inVerenigde Staten
    • Gefabriceerd inVerenigde Staten
    Classificatie
    • Categorie BIMobjectBouwmaterialen - Beton
    • UNSPSC-naamInterior finishing materials
    • UNSPSC-code3016
    • CSI MasterFormat 2014 Code09 93 23.53
    • CSI MasterFormat 2014 TitelInterior Finishing
    • OmniClass-nummer23-15 00 00
    • OmniClass-titelInterior and Finish Products
    • CSI UniFormat II-codeC30
    • CSI UniFormat II-titelINTERIOR FINISHES

    Beschikbaarheid regio

    Noord Amerika
    Amerikaanse Maagdeneilanden
    Anguilla
    Antigua en Barbuda
    Aruba
    Bahama's
    Barbados
    Belize
    Bermuda
    Britse Maagdeneilanden
    Canada
    Caribisch Nederland
    Costa Rica
    Cuba
    Curaçao
    Dominica
    Dominicaanse Republiek
    El Salvador
    Grenada
    Groenland
    Guadeloupe
    Guatemala
    Haïti
    Honduras
    Jamaica
    Kaaimaneilanden
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Porto Rico
    Saint Kitts en Nevis
    Saint Martin
    Saint Vincent en de Grenadines
    Saint-Barthélemy
    Saint-Pierre en Miquelon
    SaintLucia
    Sint Maarten
    Trinidad en Tobago
    Turks- en Caicoseilanden
    Verenigde Staten