Publiceer je producten
4-Post Assembly 4 Post Shelving
4-Post Assembly 4 Post Shelving
4-Post Assembly 4 Post Shelving
4-Post Assembly 4 Post Shelving
4-Post Assembly 4 Post Shelving
4-Post Assembly 4 Post Shelving
4-Post Assembly 4 Post Shelving
4-Post Assembly 4 Post Shelving

4-Post Assembly 4 Post Shelving

4-Post Shelving Assembly

This flexible 4-post family is made entirely of shared component files, giving users a comprehensive set of pre-assembled configurations, and the power to assemble a completely custom solution from scratch. Visible sub-components update the schedule with product codes, weights, and listed prices in real time.

  • Truly flexible shelving. A virtually unlimited number of configurations, uses and applications
  • Used in everything from library stacks, museum storage, legal office filing systems, and more
  • Set number of shelves to 1 or 0 and build your own custom shelving solution using our shared accessory families including bin dividers, garment rails, pull-out reference shelves, and flipper doors


The 4-Post line is designed to be highly flexible and adaptable with every Revit model built to reflect its real world counterparts as closely as possible. Use the prebuilt shelving family to visualize your storage solutions or use the shared sub-component families to build your own custom solution right down to the last shelf.Our 4-Post shelving incorporates both “L” & “T” shaped uprights allowing for a variety of shelving configurations. All shelf units are assembled without the use of nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage capacity with minimal floor intrusion. Shelves are available slotted to accept adjustable file dividers. All shelf units are designed for expansion and are available as mobile-ready for easy conversion. Our 4-Post units are ready to assemble with no special tools required. Available depths make it an ideal choice for letter, legal, binder, and book storage applications.
Specificatie
  • UprightsFormed from steel sheet to a hollow “tee” shape for intermediate supports and formed angles for end supports. Uprights have keyhole slots on inner wall only. Provide with sheet steel panels full height and depth of end uprights. Provide intermediate “tee” uprights between adjacent units.Shelves and SupportsFormed from sheet steel with flanges on all sides and return hem on front and back flanges. Ends are formed to clear inside of upright offset panels. Shelves are independently adjustable. Shelf supports are formed from heavy gauge steel sheet with four solid steel shoulder rivets, two per ear, that interlock with inner wall of uprights.Nominal Shelf Dimensions
    • Width: 12 inches (305MM) to 72 inches (1829MM) sections used to meet project requirements
    • Shelf Edge Vertical Profile: 3/4 inch (19MM) maximum
    • Vertical Adjustment Increment: 1-1/2 inches (38MM)
    • Width Of Intermediate Uprights: 2 inches (51MM)
    • Clearance Between Uprights: Nominal shelf section width minus 2 inches (51MM)
    • Levelness of Completed Shelf Units: Maximum 1/8 inch (3.2MM) between bottom shelf and canopy top, measured along the edge of any upright in any direction
    Accessories
    • File dividers
    • Center stops
    • Reference shelves
    • Back stops
    • Laminate end panel
    • End panel mounting brackets
    • Backs
    • Bin dividers
    • Bin fronts
    FinishesPaint finish, low pressure laminate, high pressure laminate, or acrylic finish.Sustainability
    • Up to 85% pre and post-consumer recycled content
    • Indoor Advantage Gold Certified for non-emissive materials and finishes (SCS IAQ)
    • Environmental Product Declarations (EPD) with more details about global warming potential, energy demand, and recycled content are available for select products upon request
Technische specificatie
  • Unieke ref.SSG_Shelving_4_Post_PCS
  • ProductfamiliePublic Safety
  • ProductgroepWeapon Storage, Lockers, Workstations, Mobile Shelving and Detention
  • TypeObject (enkelvoudig object)
  • Publicatiedatum2021-01-29
  • Editienummer1
Gerelateerd
  • HoofdmateriaalStaal met poedercoating
  • Ontworpen inVerenigde Staten
  • Gefabriceerd inVerenigde Staten
Classificatie
  • Categorie BIMobjectMeubilair - Rekken en opslag
  • IFC-classificatieFurniture
  • CSI MasterFormat 2014 Code10 56 13.16
  • CSI MasterFormat 2014 TitelPost-and-Shelf Metal Storage Shelving
  • OmniClass-nummer23-21 11 11 11
  • OmniClass-titelCommercial Storage Shelves
  • CSI UniFormat II-codeE20
  • CSI UniFormat II-titelFURNISHINGS

Beschikbaarheid regio

Noord Amerika
Amerikaanse Maagdeneilanden
Anguilla
Antigua en Barbuda
Aruba
Bahama's
Barbados
Belize
Bermuda
Britse Maagdeneilanden
Canada
Caribisch Nederland
Costa Rica
Cuba
Curaçao
Dominica
Dominicaanse Republiek
El Salvador
Grenada
Groenland
Guadeloupe
Guatemala
Haïti
Honduras
Jamaica
Kaaimaneilanden
Martinique
Mexico
Montserrat
Nicaragua
Panama
Porto Rico
Saint Kitts en Nevis
Saint Martin
Saint Vincent en de Grenadines
Saint-Barthélemy
Saint-Pierre en Miquelon
SaintLucia
Sint Maarten
Trinidad en Tobago
Turks- en Caicoseilanden
Verenigde Staten