Moby P 2.1 - Outside Lighting

Projector for underwater applications (not suitable for underwater applications in salt water, only suitable for underwater applications)

surface mounted (wall, floor), max depth 10 m
Power: 20W
Power supply: 24Vdc
Lumen output at source: 1522 lm (3000K),  RGBW: 884 lm, R: 138 lm G: 259 lm B: 69 lm W: 418 lm (4000K),  cyan: 782 lm
Delivered lumen output: 1078 lm (3000K, 34°),  RGBW: 626 lm, R: 97 lm, G: 184 lm, B: 48 lm, W: 297 lm (4000K, 34°),  cyan: 552 lm (34°)
3 power LEDs groups, 2-step MacAdam (white LED colour);  RGBW: 3 RGBW LEDs groups;  Cyan: 3 Cyan LEDs groups 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K, RGBW, shades of cyan
Optics: 22°, 34°, 62°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality technical filter, 31°x64°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality elliptical technical filter.
Body material: body made of thermally conductive technopolymer. Bracket in AISI 316L stainless steel, tumble finished and painted
Screen material: glass cover in 12-mm-thick, tempered extra-clear glass with vitrified serigraphy suitable for installations in seawater and guaranteeing resistance to corrosion and to knocks and scratches. Mixing chamber to ensure the light's chromatic uniformity.
power supply unit not included
includes 5 m neoprene cable, H05RN-F 2x1,00 Ø6.8 mm;  RGBW-cyan: includes 5 m FEP+RUB cable (equivalent to H05RN-F cable), 6x0,50 Ø6.3 mm
Ingress protection: IP65, IP68
Impact resistance: IK10
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions
Operating temperature: 0°C — +45°C (installation underwater)
Maximum device temperature: 40°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: III
Weight: 2470 g
Dimensions: Ø155x173 mm
Energy efficiency class: A / A+ / A++
Accessories: WH0402 Honeycomb louvre 
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption