Geofor - Overlapping prefabricated bed joint reinforcement

Geofor - Overlapping prefabricated bed joint reinforcement

Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.

Specificatie

Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.

Technische specificatie

Unieke ref.geofor
ProductfamilieBed Joint Reinforcement
ProductgroepGeofor
TypeObject (enkelvoudig object)
Publicatiedatum2017-05-08
Editienummer1

Links

Product-urlhttp://www.geohidrol.com/?products=geofor%C2%AE

Gerelateerd

HoofdmateriaalStaal
Ontworpen inSpanje
Gefabriceerd inSpanje

Classificatie

Categorie BIMobjectBouwmaterialen - Versteviging
IFC-classificatieReinforcing Mesh
UNSPSC-naamBricks
UNSPSC-code301316
Uniclass 2015-codeSs_25_13_50
Uniclass 2015-beschrijvingMasonry wall systems
CSI MasterFormat 2014 Code04 05 19.26
CSI MasterFormat 2014 TitelMasonry Reinforcing Bars
OmniClass-nummer23-13 21 21 11
OmniClass-titelMasonry Reinforcing
CSI UniFormat II-codeB2010
CSI UniFormat II-titelExterior Walls

Beschikbaarheid regio

Europa
Åland
Albanië
Andorra
België
Bosnië en Herzegovina
Bulgarije
Cyprus
Denemarken
Duitsland
Estland
Faeröer
Finland
Frankrijk
Gibraltar
Griekenland
Guernsey
Hongarije
Ierland
IJsland
Isle of Man
Italië
Jersey
Kroatië
Letland
Liechtenstein
Litouwen
Luxemburg
Malta
Moldavië
Monaco
Montenegro
Nederland
Noord-Macedonië
Noorwegen
Oekraïene
Oostenrijk
Polen
Portugal
Roemenië
Rusland
San Marino
Servië
Slovenië
Slowakije
Spanje
Spitsbergen
Tsjechië
Vaticaanstad
Verenigd Koninkrijk
Wit-Rusland
Zweden
Zwitserland