Publiceer je producten
SOFT FOOT Antivibration Rubber Stand 300x300
SOFT FOOT Antivibration Rubber Stand 300x300
SOFT FOOT Antivibration Rubber Stand 300x300

    SOFT FOOT Antivibration Rubber Stand 300x300

    Soft Foot is intended for standing and for damping vibrations of installations in buildings, including residential buildings, collective housing and public utility buildings, inside, outside and on the roofs of buildings. It does not require anchoring to the surface, so it can be used on a roof covered with roofing felt or directly on the floor in rooms. Economical, fully flexible and effectively damping vibrations way to support devices, ventilation ducts, storage racks, containers.

    Specificatie
    • Product characteristics

      The base is made of SBR rubber (recycled) with an admixture of polyurethane and steel sleeves and rivet nuts.

      Soft Foot is equipped with 1 or 5 points for screwing standard fasteners (rods, screws, etc.) with a diameter of 8 mm
      Variants:
      - with 1 fastener:
      - with 2 fasteners: VARIANT A VARIANT B
      - with 4 fasteners:

      SBR RUBBER shows very good mechanical strength, especially against abrasion and tearing. It is very resistant to squeezes and hugs, abrasion resistant, resistant to tearing. Its properties are preserved even at low temperatures.

      SBR wykazuje wartości:

      • hardness: 50-80 ShA,
      • density: 1,4 do 1,6 g/cm3,

      carried air temperature range: 20 °C do 70 °C

    Technische specificatie
    • Unieke ref.soft-foot-antivibration-rubber-stand-copy
    • ProductfamilieVentilation ducts
    • ProductgroepBases supporting the installation
    • TypeBouwmateriaal
    • Publicatiedatum2023-10-26
    • Editienummer1
    • Hoogte (mm)55
    • Breedte (mm)300
    • Diepte (mm)300
    Gerelateerd
    • HoofdmateriaalRubber
    • Secundair materiaalGegalvaniseerd staal
    • Ontworpen inPolen
    • Gefabriceerd inPolen
    • Nettogewicht (kg)3.6
    Classificatie
    • Categorie BIMobjectHVAC-apparatuur - Luchtbehandeling
    • IFC-classificatieTrillingsdemper
    • ETIM-codeEG018410
    • ETIM-naamVibration dampers
    • Uniclass 2015-codePr_80_77_94
    • Uniclass 2015-beschrijvingVibration isolation products
    • CSI MasterFormat 2014 Code13 48 13
    • CSI MasterFormat 2014 TitelManufactured Sound and Vibration Control Components
    • OmniClass-nummer23-19 29 19 11
    • OmniClass-titelSound, Vibration and Seismic Control Products

    Beschikbaarheid regio

    Europa
    Åland
    Albanië
    Andorra
    België
    Bosnië en Herzegovina
    Bulgarije
    Cyprus
    Denemarken
    Duitsland
    Estland
    Faeröer
    Finland
    Frankrijk
    Gibraltar
    Griekenland
    Guernsey
    Hongarije
    Ierland
    IJsland
    Isle of Man
    Italië
    Jersey
    Kroatië
    Letland
    Liechtenstein
    Litouwen
    Luxemburg
    Malta
    Moldavië
    Monaco
    Montenegro
    Nederland
    Noord-Macedonië
    Noorwegen
    Oekraïene
    Oostenrijk
    Polen
    Portugal
    Roemenië
    Rusland
    San Marino
    Servië
    Slovenië
    Slowakije
    Spanje
    Spitsbergen
    Tsjechië
    Vaticaanstad
    Verenigd Koninkrijk
    Wit-Rusland
    Zweden
    Zwitserland