제품 게시
ZF1201-U( )4-F_ One-Piece Faceplate Carrier System
ZF1201-U( )4-F_ One-Piece Faceplate Carrier System
    Zurn

    ZF1201-U( )4-F_ One-Piece Faceplate Carrier System

    EZCarry® one-piece combination floor mounted foot/faceplate horizontal siphon jet system supplied for ( ) rough-in height features high performance Dura-Coated cast iron main fitting with hydro-mechanically optimized sweep, 3” [76mm] no-hub connections, and extended 2” [51mm] vent. Faceplate enables prefabrication with strut channel or angle iron. Corrosion resistant adjustable 3” [76mm] diameter x 6” [152mm] coupling with integral test cap is designed to increase flow velocity and line carry. Labor saving Neo-Seal bonded gasket optimizes flow performace while reducing installation steps. Complete system includes one-piece combination foot/faceplate, heavy-duty 1/2” [13mm] rear anchor tie down (optional dependent on installation method, see intallation instructions), fixture bolts, trim and stud protectors. EZCarry® one-piece combination floor mounted foot/faceplate system complies with all applicable requirements of ASME A112.6.1M up to a 500 lb maximum static load.

    Compliance:

    Massachusetts Approved, ASME, UPC, IPC, NPCC

    Features:

    • One-piece faceplate set to rough-in heights with no complicated vertical adjustments required
    • Provides top and bottom connection points for common prefabrication methods
    • Multiple secure mounting options and machine threaded holes to prevent separation from the carrier during transportation
    • No rear anchor attachment is required to meet load requirements in most installations
    • 500 lb max static load per ASME 112.6.1M
    • Multiple secure mounting options and machine threaded holes to prevent separation from the carrier during transportation
    • No rear anchor attachment is required to meet load requirements in most installations
    • EZCarry hydraulically optimized waterway and sweep propels waste further to virtually eliminate clogging and downtime

    Models Available

    ZF1201-UL4-F55 / ZF1201-UL4-F75 | ZF1201-UR4-F55 / ZF1201-UR4-F75 | ZF1201-UD4-F75-A | ZF1201-UL4-F75-A-JC | ZF1201-UR4-F75-A-JC

    Keywords: strut channel, prefabrication, Water Closet Carrier System, CARRIER SYSTEM, prefabrication construction, EZCarry, FACEPLATE CARRIER SYSTEM, One-Piece Faceplate, carrier assemblies, ONE PIECE FACEPLATE, Flexible Prefabrication, vertical adjustments, ONE PIECE footplate

    기술 사양
    • 특징 참조zf1201-u-one-piece-combination-floor-faceplate-ezcarry-horizontal-water-closet
    • 제품군Carriers & Fixture Supports
    • 제품분류Water Closet & Toilet Carriers
    • 유형개체 (단일 개체)
    • 게시일2023-05-22
    • 에디션 넘버3
    • 높이(인치)5.5
    • 너비(inches)18
    • 깊이(inches)17
    관련성
    • 주 재료Cast iron
    • 부 재료ABS
    • 설계국가미국
    • 순 중량(Lbs)68
    분류
    • BIMobject 카테고리배관 - 배수
    • IFC 분류위생 터미널
    • ETIM 코드EC011338
    • ETIM 이름Accessories for double wall/built-in element sanitary
    • Uniclass 2015 코드Pr_20_85_09_96
    • Uniclass 2015 설명Wall-hung WC support brackets
    • CSI 마스터 형식 2014 코드22 42 13.13
    • CSI 마스터 형식 2014 제목Commercial Water Closets
    • OmniClass 번호23-31 19 19
    • OmniClass 제목Water Closets