제품 게시
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
    Wibe group

    DEFEM HDG - Mesh Trays

    Defem Mesh Tray - Flexible mesh tray system for the routing of power, data and control cables. C3 Hot-dip galvanized Indoor- and outdoor environments: Urban and light industrial areas, breweries, dairies, laundries etc. – Average environmental corrosion. – Areas with average levels of humidity and some airborne pollution caused by production processes. – Atmospheres containing some salt or average levels of airborne pollution. – EN-ISO1461:2009 C4 Hot-dip galvanized Indoor- and outdoor environments: Chemical plants, industrial and coastal areas, swimming pools, farms, dockyards etc. – High environmental corrosion. – Areas with high levels of humidity and considerable airborne pollution. – Atmospheres with average salt content or discernible levels of airborne pollution. – EN-ISO1461:2009.
    사양
    • Defem is a complete cable support system for the routing of power, data and control cables. Three finishes are available; electro-zinc, hot-dip galvanized and AISI316L acid-proof stainless steel. The standard mesh trays are available in four heights (45, 55, 60 and 110 mm) and eight widths (53, 75, 120, 220, 320, 422, 522 and 622 mm). The standard length is 2.5 m. For specific applications the range also includes specially shaped C-, G- and Z-mesh trays plus three different shapes of mini mesh trays. There is a complete range of supports for wall-mounted, floor-laid, ceiling-suspended and U-bar supported installations. Accessories such as bends, raisers, reducers, etc. are formed on site from length material elements. Thanks to the uniquely shaped well-rounded wire ends, the mesh trays comply with all safety requirements for installers and cables. In addition, the wire diameter design and size allow higher safety working-load values in comparison to any other product in the market. Standards IEC 61537, UNE EN 50102, UNE EN ISO 9227, DIN 4102-12 for fire resistance E90 Materials Electro-zinc, Hot-dip galvanized, AISI316L acid-proof stainless steel
    기술 사양
    • 특징 참조CMS-DEFEM-HDG
    • 제품군Cable Trays
    • 제품분류Hot Dip Galvanized solution
    • 유형개체 (단일 개체)
    • 게시일2022-02-14
    • 에디션 넘버1
    링크
    관련성
    • 주 재료
    • 부 재료
    • 설계국가스웨덴
    • 제조국가스웨덴
    분류
    • BIMobject 카테고리전기 - 분배
    • IFC 분류케이블 캐리어 장착
    • UNSPSC 이름Cable accessories
    • UNSPSC 코드26121630
    • Uniclass 2015 코드Pr_65_70_11_17
    • Uniclass 2015 설명Cable trays
    • CSI 마스터 형식 2014 코드26 05 36
    • CSI 마스터 형식 2014 제목Cable Trays for Electrical Systems
    • OmniClass 번호23-35 33 19
    • OmniClass 제목Electrical Cable Trays
    • CSI 단일 형식 II 코드D5010
    • CSI 단일 형식 II 제목Electrical Service and Distribution

    지역 가용성

    유럽
    건지
    그리스
    네덜란드
    노르웨이
    덴마크
    독일
    라트비아
    러시아
    루마니아
    뤽상부르
    리투아니아
    리히텐슈타인
    맨섬
    모나코
    몬테네그로
    몰도바
    몰타
    바티칸 시국
    벨기에
    벨로루시
    보스니아 헤르체고비나
    북마케도니아
    불가리아
    산마리노
    세르비아
    스발바르 얀마옌 제도
    스웨덴
    스위스
    스페인
    슬로바키아
    슬로베니아
    아이슬란드
    아일랜드
    안도라
    알바니아
    에스토니아
    영국
    오스트리아
    올란드 제도
    우크라이나
    이탈리아
    저지섬
    지브롤터
    체코 공화국
    크로아티아
    키프러스
    페로 제도
    포르투갈
    폴란드
    프랑스
    핀란드
    헝가리