Torverk Industrial Doors AB팔로우

Q-Door QF3 Manually operated folding door

사양

사양

• Size & panel division Exact Sizes To insulate well and minimize air leakage, we tailor your door exactly for your door opening.Width: from 1.3 meters up to about 20 meters.Height: The maximum height is 6 meters. Panel division We build your folding door with the number of sections required to fit the width of your doorway. A manual door can have between 1 – 20 sections and an electrically operated 2 – 4 panels. Normally, the same number of panels are folded in each direction, but a folding door can also be built so that folding/opening is asymmetrical or only in one direction. Rust And Energy Loss? Not On Our Watch? The Q-Door panel is 56 mm thick. It is wrapped with C5 level rust protected SSAB:s 0,6 mm Greencoat sheet metal, coated with bio based paint. The metal is bent for optimum torsional stiffness and the panel is filled with a high density filler foam that offer supreme insulation. The result: a door panel that can withstand extreme weather, gives you a warm indoor environment and a low energy cost. U-value: best cut approximately 0.22 W/m² °c. U-value of an example door 5×5 meter: 0.90 W/m² ° C. T-value Example door: 1 m³/h & m² Metal sheet: 0.6 mm SSAB greencoat If you want another color we can coat your door with any of the 10 million colors in the NCS- and RAL-systems.

기술 사양

기술 사양

• 특징 참조manuel-vikport-QF3-1-2
• 제품군Industrial doors
• 제품분류Folding door
• 유형개체 (단일 개체)
• 게시일2024-04-30
• 에디션 넘버1

링크

링크

• 제품 URLhttps://torverk.se/en/product/folding-door-sandwich-built/

분류

분류

• BIMobject 카테고리문 - 산업용 문
• IFC 분류문
• Uniclass 2015 코드Ss_25_30_20_40
• Uniclass 2015 설명Industrial doorset systems
• CSI 마스터 형식 2014 코드08 34 19
• CSI 마스터 형식 2014 제목Industrial Doors
• OmniClass 번호23-17 11 13 21
• OmniClass 제목Folding Metal Doors