4-Post Assembly 4 Post Shelving

4-Post Shelving Assembly

This flexible 4-post family is made entirely of shared component files, giving users a comprehensive set of pre-assembled configurations, and the power to assemble a completely custom solution from scratch. Visible sub-components update the schedule with product codes, weights, and listed prices in real time.

Truly flexible shelving. A virtually unlimited number of configurations, uses and applications
Used in everything from library stacks, museum storage, legal office filing systems, and more
Set number of shelves to 1 or 0 and build your own custom shelving solution using our shared accessory families including bin dividers, garment rails, pull-out reference shelves, and flipper doors

The 4-Post line is designed to be highly flexible and adaptable with every Revit model built to reflect its real world counterparts as closely as possible. Use the prebuilt shelving family to visualize your storage solutions or use the shared sub-component families to build your own custom solution right down to the last shelf.Our 4-Post shelving incorporates both “L” & “T” shaped uprights allowing for a variety of shelving configurations. All shelf units are assembled without the use of nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage capacity with minimal floor intrusion. Shelves are available slotted to accept adjustable file dividers. All shelf units are designed for expansion and are available as mobile-ready for easy conversion. Our 4-Post units are ready to assemble with no special tools required. Available depths make it an ideal choice for letter, legal, binder, and book storage applications.

사양

UprightsFormed from steel sheet to a hollow “tee” shape for intermediate supports and formed angles for end supports. Uprights have keyhole slots on inner wall only. Provide with sheet steel panels full height and depth of end uprights. Provide intermediate “tee” uprights between adjacent units.Shelves and SupportsFormed from sheet steel with flanges on all sides and return hem on front and back flanges. Ends are formed to clear inside of upright offset panels. Shelves are independently adjustable. Shelf supports are formed from heavy gauge steel sheet with four solid steel shoulder rivets, two per ear, that interlock with inner wall of uprights.Nominal Shelf Dimensions
- Width: 12 inches (305MM) to 72 inches (1829MM) sections used to meet project requirements
- Shelf Edge Vertical Profile: 3/4 inch (19MM) maximum
- Vertical Adjustment Increment: 1-1/2 inches (38MM)
- Width Of Intermediate Uprights: 2 inches (51MM)
- Clearance Between Uprights: Nominal shelf section width minus 2 inches (51MM)
- Levelness of Completed Shelf Units: Maximum 1/8 inch (3.2MM) between bottom shelf and canopy top, measured along the edge of any upright in any direction
Accessories
- File dividers
- Center stops
- Reference shelves
- Back stops
- Laminate end panel
- End panel mounting brackets
- Backs
- Bin dividers
- Bin fronts
FinishesPaint finish, low pressure laminate, high pressure laminate, or acrylic finish.

기술 사양

특징 참조SSG_Shelving_4_Post_PCS
제품군Public Safety
제품분류Weapon Storage, Lockers, Workstations, Mobile Shelving and Detention
유형개체 (단일 개체)
게시일2021-01-29
에디션 넘버1

링크

관련성

주 재료파우더 코팅 강철
설계국가미국
제조국가미국

분류

BIMobject 카테고리가구 - 선반 & 보관
IFC 분류가구
CSI 마스터 형식 2014 코드10 56 13.16
CSI 마스터 형식 2014 제목Post-and-Shelf Metal Storage Shelving
OmniClass 번호23-21 11 11 11
OmniClass 제목Commercial Storage Shelves
CSI 단일 형식 II 코드E20
CSI 단일 형식 II 제목FURNISHINGS

지역 가용성

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코