제품 게시
Very High Acoustic Performance Drywall - PREGYMETAL SINEMAX® - SINIAT
Very High Acoustic Performance Drywall - PREGYMETAL SINEMAX® - SINIAT
Very High Acoustic Performance Drywall - PREGYMETAL SINEMAX® - SINIAT
    Siniat France

    Very High Acoustic Performance Drywall - PREGYMETAL SINEMAX® - SINIAT

    ACOUSTIC SPECIFICATIONS COMPLIANCE

    > SINEMAX walls meet the most demanding acoustic specifications fully compliant with the sound requirements of the CST Guide issued by the French Image and Sound Technical High Commission.

    > For acoustic measurements in situ using the Dolby Atmos sound in a cinema, the noise level in the surrounding room is below the NR 25 graph (CST Guide recommendation).

    > The apparent sound reduction index of the SINEMAX partition at the 63Hz octave is 44 dB and 59 dB at the 125Hz octave. HIGH

    PERFORMANCE AT LOW FREQUENCIES

    > The new SINEMAX acoustic joint contains a higher performance elastomer to reduce low frequency transmissions thanks to its 11 Hz cut-off frequency. It reduces structure-borne transmissions to negligible levels compared to airborne transmissions.

    > The replacement of standard plasterboard by high-density PREGYPLAC dB BA13 acoustic plasterboards provides a high level of sound insulation straight from lower frequencies.

    사양
    • THE SINEMAX SOLUTIONS FOR STRINGENT TECHNICAL REQUIREMENTS

      > Rw + C from 69 to 76 dB thanks to new SINEMAX joints and PREGYPLAC dB BA13 and PREGYPLAC BA18 S boards.

      > Height: up to 14.10 m with standard PREGYMETAL columns.

      > Thickness from 260 to 640 mm to suit all configurations.

      > EI 60 fire resistance and R 60 fire stability for enclosed structures.

      > Impact resistance with High Strength Hardnedss PREGYPLAC BA18 S boards

      SITE PRODUCTIVITY AND BUDGET CONTROL

      > SINEMAX installation uses the same techniques of dry plasterboard wall construction. It adapts perfectly to metal constructions and light façades and will help in meeting very tight construction deadlines.

      > The job of the plasterboard installer is made easier by products that are suitable for high-wall constructions. PREGYPLAC BA18 S plasterboards have a reduced width of 90 cm and PREGYMETAL standard frames are made of 6/10° steel. These products simplify handling and screwing, while still ensuring health and safety compliance - installer safety.

      > Budgets are optimized by a 30% decrease in the framework density, with the new 90 cm spacing between columns of the BA18 S boards.

      > Site supply ensured. With a reduced quantity of accessories, boards and frames are readily available to ensure deliveries and construction stocks.

    기술 사양
    • 특징 참조FR_SW_SINEMAX
    • 제품군Partitions & Interior walls
    • 제품분류Prégymétal
    • 유형조립식 (다중 개체)
    • 게시일2019-09-18
    • 에디션 넘버1
    관련성
    • 주 재료석고
    • 부 재료
    • 설계국가프랑스
    • 제조국가프랑스
    분류
    • BIMobject 카테고리벽 - 파티션
    • IFC 분류
    • UNSPSC 이름Wallboard
    • UNSPSC 코드30161501
    • Uniclass 2015 코드Ss_25_10_30_35
    • Uniclass 2015 설명Gypsum board partition systems
    • OmniClass 번호23-15 11 11 11 11
    • OmniClass 제목Metal Framed Gypsum Board Fixed Partitions
    • CSI 단일 형식 II 코드C1010
    • CSI 단일 형식 II 제목Partitions

    지역 가용성

    유럽
    프랑스