제품 게시
GRAFT FR Damper
GRAFT FR Damper
    Polyseam

    GRAFT FR Damper

    GRAFT FR Damper is used to fire proof ventilation ducts which penetrate fire rated constructions such as fire compartments and fire walls; preventing the passage of fire and smoke (surrounding and inside the ventilation duct).

    The product consists of a steel casing and contains horizontal steel blades, treated with a technically advanced heat expanding graphite which closes off the whole damper in a fire. The aperture surrounding the dampers are fire sealed with GRAFT fire stopping products.

    The damper can be installed in the fire seal and the ventilation ducting attached, or the damper can be connected to the ducting and then fire sealed.

    The aperture where the ducts pass through can include one or multiple ventilation ducts. One can also pass through other technical services such as cables, cable trays and pipes within the same aperture.

    Available in the following sizes: Ø63, Ø80, Ø100, Ø125, Ø160, Ø200, Ø250, Ø315, Ø400, Ø500, Ø630, Ø800, Ø1000, Ø1250

    사양
      • Maintenance-free and no electrical connections necessary.
      • The same damper can be installed in drywalls, masonry and concrete walls, timber walls, concrete floors and timber floors.
      • An aperture can include several dampers and in addition, technical services such as cables, cable trays and pipes.
      • The product seals against penetration of fire and smoke, surrounding and inside the ventilation duct.
      • Closes in the area where the fire is located (but not elsewhere), allowing the ventilation system to extract smoke from areas that are not on fire.
      • Keeps the temperature in the duct network lower than 120°C, protecting fans and sensitive units in the system.
      • Insulation of ducts is not necessary.
      • Service life of more than 50 years; the damper will last the same life cycle as the ventilation system.
      • The dampers are designed to fit standard ducting equipment, enabling the ducting system installer to easily fit the dampers.
      • The dampers are attached to the inside of the ducts, giving the benefit of space-saving.
      • The dampers are only 15 cm long and bends can be connected right behind the fire seal (also available to order in other sizes).
      • The damper can be attached to a vent on one side.
    기술 사양
    • 특징 참조GRAFT_FR_Damper
    • 제품군GRAFT
    • 제품분류FR Damper
    • 유형개체 (단일 개체)
    • 게시일2020-03-17
    • 에디션 넘버1
    • 깊이(mm)150
    관련성
    • 주 재료아연 도금 강판
    • 설계국가영국
    • 제조국가영국
    분류
    • BIMobject 카테고리내화성 제품 - 화재 차단재
    • IFC 분류객체

    지역 가용성

    유럽
    건지
    그리스
    네덜란드
    노르웨이
    덴마크
    독일
    라트비아
    러시아
    루마니아
    뤽상부르
    리투아니아
    리히텐슈타인
    맨섬
    모나코
    몬테네그로
    몰도바
    몰타
    바티칸 시국
    벨기에
    벨로루시
    보스니아 헤르체고비나
    북마케도니아
    불가리아
    산마리노
    세르비아
    스발바르 얀마옌 제도
    스웨덴
    스위스
    스페인
    슬로바키아
    슬로베니아
    아이슬란드
    아일랜드
    안도라
    알바니아
    에스토니아
    영국
    오스트리아
    올란드 제도
    우크라이나
    이탈리아
    저지섬
    지브롤터
    체코 공화국
    크로아티아
    키프러스
    페로 제도
    포르투갈
    폴란드
    프랑스
    핀란드
    헝가리