제품 게시
Henkel Polybit Watertite WA11
Polybit

Henkel Polybit Watertite WA11

Watertite WA 11 system is a composite waterproofing membrane and tile finish system, which is designed for rigid concrete surfaces in indoor conditions and which are exposed to moderate water splashes without hydrostatic pressure. Designed to be used in concrete floors and walls in domestic showers, toilets and kitchens classified as rigid surfaces, which are subjected to occasional or brief exposures to water splashes. The water exposure of such areas is categorized as moderate without hydrostatic pressure in indoor conditions.

Fields of application: indoor concrete floors and walls in domestic showers, toilets and kitchens classified as rigid surfaces, which are are subjected to occasional or brief exposures to water splashes.

사양
  • Characteristics:

    • Good flexibility
    • Thermal co-efficient of expansion similar to that of concrete
    • Good adhesion to both porous and non-porous surfaces
    • Good mechanical properties
    • For ceramic tiles (glazed & terracotta), vitrified tiles, porcelain tiles, mosaic tiles and natural stones like granite, sandstone
    • Easy workability
    • Crack resistance
    • Smooth surface finish
    • Anti fungal/Anti bacterial

    Components:

    1. Polyflex - A two component polymer mortar composite flexible water proofing slurry is applied at a minimum thickness of 2mm in two coats on the concrete surface to protect the underlying screed against moisture penetration.

    2. Watertite CL 252 - Non-woven sealing tape applied in all corners, joints, edges, floor drains and other penetrations.

    3. Ceresit CM11 - Universal polymer modified cementitious tile adhesive with very low emissions for indoor and outdoor areas.

    4. Ceresit CE33 - cement-based tile grout for filling joints in floor & wall of ceramic, porcelain, mosaic, natural stone, marble & granite indoor and outdoor areas. For joints between 1 and 8mm wide.

    System specification:

    - Mixed density, [g/cc]: 1.8±0.02 (ASTM D 1475)

    - Tensile strength, [N/mm2]: > 8 (ASTM D 412)

    - Elongation, [%]: > 50 (ASTM D 412)

    - Adhesion strength, [N/mm2]: > 0.5 (ASTM D 4541)

    - Crack bridging, [mm]: > 0.5 (ASTM C 836)

    - Hydrostatic pressure @ 5 bar: No leakage (BS EN 12390)

    - Hydrostatic negative pressure@ 3 bar: No leakage (BS EN 12390)

    - Toxicity: Non toxic (BS 6920 [WRAS])

    - Reaction to fire: Class A (ASTM E 84)

    - Abrasion resistance, [mg]: < 75 (ASTM D 4060)

    - VOC, [g/l]: < 50 (ASTM D 3960/D 236)

기술 사양
  • 특징 참조watertite-wa-11
  • 유형개체 (단일 개체)
  • 게시일2023-12-18
  • 에디션 넘버1
관련성
  • 주 재료Cementitious
  • 부 재료아크릴
  • 설계국가아랍에미레이트
  • 제조국가아랍에미레이트
분류
  • BIMobject 카테고리건축 자재 - Waterproofing & Membranes
  • IFC 분류건축물 구성요소
  • Uniclass 2015 코드Pr_20_31_02_89
  • Uniclass 2015 설명Tile adhesives
  • CSI 마스터 형식 2014 코드09 30 00
  • CSI 마스터 형식 2014 제목Tiling
  • OmniClass 번호23-15 17 13 13
  • OmniClass 제목Tile Flooring
  • CSI 단일 형식 II 코드C30
  • CSI 단일 형식 II 제목INTERIOR FINISHES

지역 가용성

아시아
아랍에미레이트