제품 게시
Class 125 Cast Iron Standard Wafer Silent Check Valves - 101MAP

Class 125 Cast Iron Standard Wafer Silent Check Valves - 101MAP

Series 101MAP cast iron standard wafer silent check valves are designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge. Maximum temperature rating 200psi at 150 degrees F.

사양
  • Features

    • Spring closes the disc before flow reversal, preventing surge and water hammer
    • Mating surfaces of the disc and seat are hand lapped for best possible sealing
    • Disc is fully guided at top and bottom to insure alignment and sealing at any installation angle
    • Disc begins to open at .5 psi
    • Disc opens 1/3” per inch of line size, greater than similar competitive products, for enhanced flow
    • Bodies are designed to accommodate 110% flow of equivalent pipe size
기술 사양
  • 특징 참조101MAP-Silent-Check-Valves
  • 제품군Specialty Products
  • 제품분류Silent Check Valves
  • 유형개체 (단일 개체)
  • 게시일2024-06-05
  • 에디션 넘버1
관련성
  • 주 재료Cast iron
  • 설계국가미국
  • 제조국가미국
분류
  • BIMobject 카테고리배관 - 밸브
  • IFC 분류밸브
  • UNSPSC 이름Ball check valves
  • UNSPSC 코드40141618
  • Uniclass 2015 코드Pr_65_54_40_13
  • Uniclass 2015 설명Check valves
  • CSI 마스터 형식 2014 코드40 05 65
  • CSI 마스터 형식 2014 제목Valves for Pump Control and Check Service
  • OmniClass 번호23-27 31 19
  • OmniClass 제목Check Valves
  • CSI 단일 형식 II 코드D20
  • CSI 단일 형식 II 제목PLUMBING

지역 가용성

북미
멕시코
미국
캐나다