제품 게시
Standing Seam Roof  Aluminium Zinc
Lindab

Standing Seam Roof Aluminium Zinc

Aluminium-zinc coated sheet steel that can be used until corrosivity class C4. The metal coating consists of 55% weight percent aluminium, 43,4% zinc and 1,6% Silica. The coating weight is 185 g/m2 and double side, and is named AZ185. The layer of Aluminium-zinc is 25 μm (0,025 mm) thick per side. The surface is treated with anti-fingerprint to prevent discolouring during handling and to facilitate shaping. The steel core in the tinsmith quality is an extra soft sheet steel. The material has practically no spring back, making it possible to make tight seams. The material can be both machine and hand seamed. For both the sake of corrosion and appearance, avoid the following combinations: • Aluminium-zinc in combination with copper, brass, iron and led as that can give rise to galvanic corrosion. Avoid runoff from these substances and bitumen products onto the sheet steel. • Wet concrete, cement and plaster which are strongly basic. • Aluminium-zinc in contact with hardwood, wet tree or pressure treated wood containing copper.
사양
  • The base material in aluminium-zinc for standing seam roof is a DX54 and is 0,6mm thick, making 1 m2 weighing approximately 4,7 kg.
기술 사양
  • 특징 참조standing-seam-roof-aluminium-zinc
  • 제품군Standing Seam Roof
  • 제품분류Steel
  • 유형개체 (단일 개체)
  • 게시일2018-03-11
  • 에디션 넘버1
관련성
  • 주 재료알루미늄
  • 설계국가스웨덴
  • 제조국가스웨덴
분류
  • BIMobject 카테고리건축 - 지붕
  • IFC 분류지붕
  • Uniclass 2015 코드Ss_30_40_50
  • Uniclass 2015 설명Metal sheet, fully supported roof and dormer covering systems
  • CSI 마스터 형식 2014 코드07 61 00
  • CSI 마스터 형식 2014 제목Sheet Metal Roofing
  • OmniClass 번호23-13 39 27 11 13
  • OmniClass 제목Sheet Metal Roofing
  • CSI 단일 형식 II 코드B30
  • CSI 단일 형식 II 제목ROOFING

지역 가용성

유럽
노르웨이
덴마크
루마니아
스웨덴
체코 공화국