BIM 객체 - 무료로 다운로드하세요! Model H1011.8HO2-1920HO, ADA Vandal-Resistant Chilled Motion-Activated Dual Fountain and Bottle Filler

Model H1011.8HO2-1920HO, ADA Vandal-Resistant Chilled Motion-Activated Dual Fountain and Bottle Filler

Model H1011.8HO2-1920HO ADA electric vandal-resistant touchless water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

Touchless operation for safety and peace of mind
Vandal resistant components include the bubblers, bowls, drains and bottom plates
18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
100% lead-free waterways
30-second obstruction time-out to reduce tampering of sensor
1 gpm (3.78 L) bottle filler laminar flow
"Hi-lo" design allows for twice the users as regular fountains and suits the needs for various user heights
Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
Designed to run at a low energy usage, this water cooler and fountain are assured to have a long-lasting life
Laminar flow prevents splashing, keeping the drinking area contained and clean
Beautiful satin finish resists stains and corrosion

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1". Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

사양

Model H1011.8HO2-1920HO ADA vandal-resistant wall mounted motion-activated drinking fountain and bottle filler shall include dual 18-gauge Type 304 Stainless Steel satin finish basins with integral swirl design, 14 gauge Type 304 Stainless Steel wall brackets and bottle filler bracket, 100% lead-free waterways, sensor operated stainless steel solenoid valves with 30-second obstruction time-out controlled by a transformer, polished chrome-plated brass vandal resistant bubbler heads with integral laminar anti-squirt flow , 1 gpm (3.78 L) laminar flow bottle filler, chrome-plated brass vandal-resistant waste strainers, vandal-resistant bottom plates, stainless steel satin finish back panels and louvered intrusion-proof grill, high and low fountain mounting levels, and 1-1/4” O.D. (3.2 cm) waste pipes. The R-134a refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C), 115 Volts, 60Hz, rated watts: 370, full load amps: 5. Haws electric water coolers comply with ARI Standard 1010 and ANSI A117.1, and are listed by Underwriter Laboratories to U.S. and Canadian standards. The botte filler requires a mounting plate; either the Haws model 6700 in-wall or the 6700R on-wall support plate.

기술 사양