FLOOR INSULATING CONCRETE MODULE 5SES20

deal to lighten cast in place concrete slabs, thanks to the insulating material used for the floor slab blocks that make it up, this module is particularly suitable for building thermally and acoustically insulated floors. In addition to an excellent thermal insulation, the floor concrete form ensures a good soundproofing, thanks to the combination of low-mass insulating material with high-mass reinforced concrete. reduction of the volume of concrete needed in relation to the required bearing capacity; additional reinforcement reduction due to the peculiar lightness of the form; easy to arrange pipes and drains passage before casting; safety and ease of handling during installation. The intrados insulation of the floor form can vary for thickness and type, according to the thermoacoustic performance that the floor must ensure. The floor form by Ecosism® include the concrete cover mesh in the rafters and it is ready for the installation of structural reinforcements and welded wire mesh. Finally, thanks to the special mesh on the intrados, the floor form can be easily plastered. Thanks to these characteristics, the floor form offers considerable advantages, that provide cost savings for the construction site such as: The reduction of the volume of concrete needed in relation to the desired bearing capacity; The reduction of the additional reinforcement due to its low weight; Simple arrangement of services Safety and ease of handling during installation thanks to its light weight;

사양

FEASIBLE TYPES INSULATION THICKNESS 40 / 50 / 80 / 100 / 130 / 150 / 200 mm JOIST HEIGHT Up to structural calculation PLASTER MESH THICKNESS 5 / 10 mm MAXIMUM THICKNESS 520 mm ADVANTAGES Inter-storey floor divider between units Possibility of building floors with both one-way and two-way joist construction. Simple arrangement of services Possibility of plastering the soffit Safe and ideal for earthquake-resistant structures as lightens the decks Insulated floor with thermal and acoustic insulation material customizable ADVANTAGES Inter-storey floor divider between units Possibility of building floors with both one-way and two-way joist construction. Simple arrangement of services Possibility of plastering the soffit Safe and ideal for earthquake-resistant structures as lightens the decks Insulated floor with thermal and acoustic insulation material customizable You will receive a special instruction manual to follow during the installation of the forms. It will show production figures, in wich each wall will be indicated with the related Ecosism® forms, signed and numbered in such a way that during the installation, the operator will follow a precise mounting procedure.

기술 사양

특징 참조5SES20
제품군SOLAI
제품분류SOLAIO ISOLATO
유형개체 (단일 개체)
게시일2020-03-12
에디션 넘버1

링크

관련성

주 재료EPS
설계국가이탈리아
제조국가이탈리아

분류

BIMobject 카테고리건축 - 데크, 슬래브 및 바닥
IFC 분류슬라브
Uniclass 2015 코드EF_30
Uniclass 2015 설명Roofs, floor and paving elements
OmniClass 번호23-13 35 23
OmniClass 제목Structural Floors and Flat Roofs
CSI 단일 형식 II 코드B
CSI 단일 형식 II 제목SHELL

지역 가용성

유럽
건지
그리스
네덜란드
노르웨이
덴마크
독일
라트비아
루마니아
뤽상부르
리투아니아
리히텐슈타인
맨섬
모나코
몬테네그로
몰도바
몰타
바티칸 시국
벨기에
벨로루시
보스니아 헤르체고비나
북마케도니아
불가리아
산마리노
세르비아
스웨덴
스위스
스페인
슬로바키아
슬로베니아
아이슬란드
아일랜드
안도라
알바니아
에스토니아
영국
오스트리아
올란드 제도
우크라이나
이탈리아
저지섬
지브롤터
체코 공화국
크로아티아
키프러스
페로 제도
포르투갈
폴란드
프랑스
핀란드
헝가리