CaptiveAire

Heat & Condensate Exhaust Only Vent Hood, VH1 Series

Name: Heat & Condensate Exhaust Only Vent Hood, VH1 Series
Rating: 3.6 (5 reviews)

3.6(5 reviews)

VH1 Series

Heat & Condensate Exhaust Hood
The VH1 Series is a Type II, Exhaust Only Hood to be used over equipment not producing grease laden vapors. Type II hoods are used for condensation or heat removal applications.

ADVANTAGES

Superior Exhaust Flow Rates:
Construction: Single wall type hood fabricated of Type 304 stainless steel, #3 or #4 polish, on all exposed surfaces when used in condensate applications. Type 430 stainless steel, #3 or #4 polish available when used for heat applications. Pre-punched hanging angles on each end of hood. Additional set provided for hoods longer than 12'.
Condensate Applications: Integral 4-sided perimeter gutter and one drain standard for high-moisture exhaust.
Optional Double Wall Front: Used when switches are needed on the face of the hood. Mechanical baffle provides a built-in wiring chase for optimal positioning of electrical controls and outlets on the front face of the hood.
Optional Make-Up Air: Up to 80% make-up air can be supplied through optional front and/or side plenums (PSP Accessory).
Optional Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.

PERFORMANCE
ConfigurationLight Load Exhaust CFM/ftHeavy Load Exhaust CFM/ftWall & 1-piece island 100 150

CERTIFICATIONS
The VH1 Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models VH1 are ETL Listed under file number 3186625SAT-001 and complies with UL710, ULC710 and ULC-S646 Standards.

기술 사양

특징 참조captiveaire-040
제품군HVAC
제품분류Hood and Ventilation Equipment
유형개체 (단일 개체)
게시일2012-09-26
에디션 넘버1

링크

제품 URLhttp://www.captiveaire.com/catalogcontent/hoods/vh/index.asp?catid=182

관련성

설계국가미국
제조국가미국

분류

BIMobject 카테고리HVAC - 기계식 환기 장치
Uniclass 2015 코드Ss_65_40_33_51
Uniclass 2015 설명Mechanical supply ventilation systems
CSI 마스터 형식 2014 코드23 00 00
CSI 마스터 형식 2014 제목Heating, Ventilating, and Air Conditioning (HVAC)
OmniClass 번호23-33 00 00
OmniClass 제목HVAC Specific Products and Equipment
CSI 단일 형식 II 코드D30
CSI 단일 형식 II 제목HVAC

지역 가용성

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코