ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier

ARDEX VB 100™ is a ready-to-use, one-component, water-based, two-coat system formulated to suppress excessive moisture in concrete.

Key Features

Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
For RH readings up to 100%
For absorbent concrete
No minimum profile required
No priming required prior to installation of ARDEX underlayments
Fast drying – install ARDEX underlayments in as little as 60 minutes after applying the second coat
One-component system
Ready for use*, resealable and reusable
Easy to use and apply
Water-based, Zero VOC
ASTM E96 < .1 perms

*As some settling can occur, stir the ARDEX VB 100 with a wooden paint stirrer or similar prior to use to ensure that all components that have settled are in full suspension. DO NOT MECHANICALLY MIX. DO NOT ADD WATER OR OTHER ADDITIVES!

사양

Installation
Coverage: Approx. 1125 sq. ft. (27.6 sq. m) per unit at 2 coats
Approx. 225 sq. ft. per gal. (5.5 sq. m per L) at 2 coats (Will vary with concrete surface profile, porosity and texture)
Performance
Effect of 14 pH Solution (ASTM D1308): No effect
Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
Install Underlayment: 1 – 24 hours
VOC: 0 g/L
Packaging: One 5 gal. (19 L) pail
Storage: Store in a cool, dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
Shelf Life: 1 year, if unopened
Open containers remain usable for 6 weeks if sealed and stored under proper conditions. Keep container closed when not in use.
Warranty: ARDEX L.P. Standard Limited Warranty applies.
Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.

기술 사양

특징 참조Ardex-vb-100
제품군Moisture Control System
제품분류One Component Moisture Control System
유형개체 (단일 개체)
게시일2024-02-21
에디션 넘버1

링크

관련성

주 재료Polymer-modified cementitious

분류

BIMobject 카테고리바닥재 - Coatings & Coverings
IFC 분류Floor
UNSPSC 이름Flooring
UNSPSC 코드301617
Uniclass 2015 코드EF_30_20
Uniclass 2015 설명Floors
CSI 마스터 형식 2014 코드09 60 00
CSI 마스터 형식 2014 제목Flooring
OmniClass 번호23-15 17 11
OmniClass 제목Flooring Specialties and Accessories
CSI 단일 형식 II 코드C3020
CSI 단일 형식 II 제목Floor Finishes

지역 가용성

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코