제품 게시
ARDEX SD M™ Designer Floor Finish™
ARDEX SD M™ Designer Floor Finish™
    ARDEX

    ARDEX SD M™ Designer Floor Finish™

    ARDEX SD-M™ is a self-drying, trowelable topping for fast-track finishing or resurfacing of interior concrete, terrazzo and ceramic, quarry and porcelain tile. A blend of Portland cement and other hydraulic cements, ARDEX SD-M can be used to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing.

    Key Features

    • Use over concrete, terrazzo and ceramic, quarry and porcelain tile
    • Provides a smooth, permanent, durable finish
    • Easy to mix and apply
    • Mixes with water only, no additives necessary
    • Outstanding coverage with excellent bond
    • Mold and mildew resistant
    • Portland cement-based
    • Use for interior floors only
    • Can be used to create a burnish-polished surface on indoor concrete
    • Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications
    사양
    • Installation

      Mixing Ratio: 2 quarts (1.9 L) of water to one 10 lb. (4.5 kg) bag
      For smaller batches, use 2.5 parts powder to 1 part water by volume for the scratch and finish coat, or 3.5 parts powder to 1 part water for filling pop-outs and spalls.
      Coverage: 80 – 100 sq. ft. (7.4 – 9.3 sq. m) per bag in 2 coats; (Actual coverage may vary)

      Performance

      Initial Set (ASTM C191): Approx. 45 minutes
      Final Set (ASTM C191): Approx. 90 minutes
      Compressive Strength (ASTM C109/mod – Air Cure Only): 5,000 psi (352 kg/sq. cm.) at 28 days
      Flexural Strength (ASTM C348): 1,200 psi (84 kg/sq. cm.) at 28 days
      Walkable: 2 hours
      Begin Processing: 24 – 72 hours
      Colors Available: Gray and White
      Packaging: 10 lb. (4.5 kg) bag
      Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Protect unused material by removing air from bag and sealing tightly.
      VOC: 0
      Shelf Life: 6 months, if unopened
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

    기술 사양
    • 특징 참조ARDEX-sd-m
    • 제품군ARDEX Surfaces
    • 제품분류Overlays and Toppings
    • 유형개체 (단일 개체)
    • 게시일2024-02-21
    • 에디션 넘버1
    분류
    • BIMobject 카테고리바닥재 - 언더레이
    • IFC 분류Floor
    • UNSPSC 이름Carpet or rug underlays
    • UNSPSC 코드30161719
    • Uniclass 2015 코드Pr_35_31_06_80
    • Uniclass 2015 설명Smoothing and levelling underlay compounds
    • CSI 마스터 형식 2014 코드06 16 26
    • CSI 마스터 형식 2014 제목Underlayment
    • OmniClass 번호23-15 17 11 13 11 13
    • OmniClass 제목Portland Cement Floor Underlayments
    • CSI 단일 형식 II 코드B1010
    • CSI 단일 형식 II 제목Floor Construction

    지역 가용성

    북미
    과들루프
    과테말라
    그레나다
    그린란드
    네덜란드령 카리브 해 지역
    니카라과
    도미니카
    도미니카 공화국
    마르티니크
    멕시코
    몬세라트
    미국
    미국령 버진아일랜드
    바베이도스
    바하마
    버뮤다
    벨리즈
    생마르탱
    생바르텔레미
    생피에르앤드미클롱
    세인트루시아
    세인트빈센트그레나딘
    세인트키츠네비스
    신트마르턴
    아루바
    아이티
    앤티가 바부다
    앵귈라
    엘살바도르
    영국령 버진아일랜드
    온두라스
    자메이카
    캐나다
    케이맨 군도
    코스타리카
    쿠바
    퀴라소
    터크스케이커스 제도
    트리니다드토바고
    파나마
    푸에르토리코