제품 게시
Pipe Style Snow Guard Accessories

Pipe Style Snow Guard Accessories

PP65

The purpose of End Collars is to keep the pipes from sliding through the snow guard brackets. An End Collar is required for each end of each pipe on each run of snow guards. A run should not exceed 100' to allow for thermal expansion. 

PP56

End Caps keep moisture and insects from getting inside of the pipes. 

PP84

The External Couplings are used to join pipes together. Install pipe and slide external coupling over the end until the pipe end contacts the dimple. 

PP86

The Internal Couplings are used to join pipes together. Internal Couplings come assembled and ready for installation. Do Not Over-Tighten prior to inserting the coupling into the pipe. Over tightening the bolt will cause the gasket to expand and make the coupling installation difficult. 

PP95

Ice Flags hang from the pipe between the brackets to help keep ice and snow from sliding underneath. The Ice Flags should be placed over the top or middle pipe on two-pipe or three-pipe systems. 

PP98

Ice Screen comes in 4' lengths, 5" high; for most installations, it will need to be cut to size to fit between the snow guard brackets. Each length of Ice Screen includes 4 U-bolts, 4 backing plates, and 8 locking nuts. 

기술 사양
  • 특징 참조Pipe_Style_Snow_Guard_Accessories
  • 제품군Snow Guards
  • 제품분류Pipe Style Snow Guards
  • 유형개체 (단일 개체)
  • 게시일2022-02-10
  • 에디션 넘버1
관련성
  • 주 재료알루미늄
  • 부 재료놋쇠
  • 설계국가미국
  • 제조국가미국
분류
  • BIMobject 카테고리건축 - 지붕 액세서리
  • IFC 분류객체
  • UNSPSC 이름Roofing accessories
  • UNSPSC 코드301516
  • Uniclass 2015 코드Ss_25_16_05
  • Uniclass 2015 설명Avalanche and snow barrier systems
  • CSI 마스터 형식 2014 코드07 72 53
  • CSI 마스터 형식 2014 제목Snow Guards
  • OmniClass 번호23-13 41 21
  • OmniClass 제목Roof Snow Guards

지역 가용성

북미
미국
캐나다