Rectangular ventilation ducts system

Rectangular ventilation ducts system

3.1(9 reviews)

Rectangular ventilation ducts and fittings are intended for air distribution in ventilation and air-conditioning systems in buildings, including residential buildings, collective residence and public utility buildings. They can also be used in warehouse, industrial and farm buildings.
Straight lines and fittings may be used under the following conditions:
- temperature of transported air in the range from -30 °C to + 70 °C,
- relative humidity of transported air up to 100%,
- air transport without chemically aggressive and abrasive factors,
- air flow speed up to 16 m/s,
- static air pressure difference inside and outside the duct from -500 Pa to 1000 Pa (execution class N, according to WO-KOT / 36/01 revision 2).

Due to the requirements for corrosion resistance, Rectangular ventilation ducts and fittings made of galvanized steel sheet, grade DX51D + Z275 according to PN-EN 10346:2015 standard, are characterized by high durability and can be used in corrosive environments. C1, C2 and C3 atmospheres according to PN-EN ISO 92232012.
The connecting elements should be protected against corrosion in a manner appropriate to the corrosion resistance of the pipes.
Rectangular ventilation ducts and fittings have been classified in class A1, d0 reaction to fire according to PN-EN 13501-1:2019 and as non-flammable, non-drip and non-spreading fire inside buildings according to the decision of the Minister of Infrastructure of 12 April 2002 (Journal of Laws No. 75 of April 12, 2002, item 690, as amended). At the same time, the products are classified as fire resistant.

사양

Dimensions: 100- 4000 mm
Minimum area of fitting to calculate is 1,0 m 2.

Standard length of ducts-1500 mm.
Basic characteristics:
Duct tightness - class A or B (Assessment method PN-EN 1507:2007 i WO-KOT/36/01 wydanie 2)
Durability (elements made of galvanized steel sheet):
- weight of the zinc coating, g/m2≥ 275
- thickness of the zinc coating, pm 20 (tolerance acc. to PN-EN 10346)
Deformation: No permanent deformation or sudden change of tightness at the limit values of static pressure

기술 사양

특징 참조rectangular-ventilation-duct-system
제품군Ventilation ducts
제품분류Ventilation ducts of galvanized steel Airwent System
유형건축 자재
게시일2023-10-26
에디션 넘버1

링크

관련성

주 재료아연 도금 강판
설계국가폴란드
제조국가폴란드

분류

BIMobject 카테고리HVAC - 덕트 설비
IFC 분류덕트 세그먼트
ETIM 코드EC000059
ETIM 이름Installation duct
Uniclass 2015 코드Pr_20_85_12
Uniclass 2015 설명Bunds and ducts
CSI 마스터 형식 2014 코드23 31 00
CSI 마스터 형식 2014 제목HVAC Ducts and Casings
OmniClass 번호23-33 49 00
OmniClass 제목HVAC Ductwork

지역 가용성

유럽
건지
그리스
네덜란드
노르웨이
덴마크
독일
라트비아
러시아
루마니아
뤽상부르
리투아니아
리히텐슈타인
맨섬
모나코
몬테네그로
몰도바
몰타
바티칸 시국
벨기에
벨로루시
보스니아 헤르체고비나
북마케도니아
불가리아
산마리노
세르비아
스발바르 얀마옌 제도
스웨덴
스위스
스페인
슬로바키아
슬로베니아
아이슬란드
아일랜드
안도라
알바니아
에스토니아
영국
오스트리아
올란드 제도
우크라이나
이탈리아
저지섬
지브롤터
체코 공화국
크로아티아
키프러스
페로 제도
포르투갈
폴란드
프랑스
핀란드
헝가리

비슷한 제품

Steel Return Grille - 45° Louvered Face - Surface Mount - Model SRH-1 이미지

METALAIRE Steel Return Grille - 45° Louvered Face - Surface Mount - Model SRH-1

4.0 (9)

Square Cone Face Diffuser - Model 5700 이미지

METALAIRE Square Cone Face Diffuser - Model 5700

4.2 (6)

ABD-SEA-E Automatic Balancing Damper 이미지

Ruskin ABD-SEA-E Automatic Balancing Damper

DryerFlex - Dryer Transition Hose 이미지

InOvate DryerFlex - Dryer Transition Hose

4.2 (6)

Linear Slot Diffuser - Surface Mount 3/4" Border - Model 6600 Series 이미지

METALAIRE Linear Slot Diffuser - Surface Mount 3/4" Border - Model 6600 Series

Eggcrate Return Grille - Concealed Surface Mount - Extruded Aluminum Sidewall/Ceiling - Model CC5 이미지

METALAIRE Eggcrate Return Grille - Concealed Surface Mount - Extruded Aluminum Sidewall/Ceiling - Model CC5