CFAB™ Cellulose Absorptive Acoustical Panels

Acoustical Surfaces, Inc.

CFAB™ Cellulose Absorptive Acoustical Panels

CFAB Cellulose-Based Acoustical Panels

CFAB cellulose acoustical panels are made with a unique blend of 65-75% recycled fibers. They offer an environmentally friendly solution for acoustical panels. The panels are cost-effective, easy, and safe to handle and install. Most panels are installed onto the walls or ceiling with adhesives, but stick pins and washers can also be used. The most common applications for the CFAB Cellulose panels are in areas where aesthetics is of less importance, or in applications where they are used as an acoustical backer for a site-stretched fabric system. Some typical applications for the CFAB panels include industrial or mechanical applications, breweries or tap rooms, absorbent panels for behind stretched fabric or linear/slatted wooden walls or ceilings, under tables and chairs or in other situations where the room or space is going for an industrial / recycled aesthetic.

Controls reflections and deadens sounds within a room
Easy to handle and install – No special equipment required
Class A fire rating
Resists mold growth
Made from renewable and recycled fibers
Low VOC Emissions – Passes CDPH V1.2 Test Standard and can contribute to LEED V4.1 EQ Credit: Low-Emitting Materials

Applications:
Industrial or mechanical applications where a low cost, high absorption product is more important than aesthetics, breweries or tap rooms, absorbent panels for behind stretched fabric or linear/slatted wooden walls or ceilings, under tables and chairs or in other situations where the room or space is going for an industrial / recycled aesthetic.

Material Composition: Blended textile and paper fibers - 65-75% recycled content

Thicknesses: 1", 1.5" and 2"

Densities Available:
1" 3 lb. pcf
1.5" 3 lb. pcf
1" 6 lb. pcf (minimum order may apply)
1" 8 lb. pcf (minimum order may apply)
2" 3 lb. pcf

Standard Size: 24" x 48"
Additional Sizes: **12" x 12", 24" x 24", **48" x 48", 48" x 96"
**Minimum quantities apply, please call for details.**

Product Safety: Our CFAB Cellulose panels contains flame retardants to ensure maximum safety for building insulation, and carry a Class A fire rating. To protect against mold growth, CFAB cellulose panels contain an EPA-registered fungicide. CFAB does not contain any harmful airborne particles, and do not itch or irritate skin.

사양

SECTION 09 51 13
CFAB Cellulose Acoustical and Thermal Ceiling Panels
PART 1 GENERAL
1. SECTION INCLUDES
  1. CFAB cellulose acoustical and thermal ceiling panels and accessories for ceiling installation.
2. REFERENCES
  1. American Society for Testing and Materials (ASTM)
    ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
    ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials.
    ASTM E795: Standard Practices for Mounting Test Specimens During Sound Absorption Tests
  2. International Code Council (ICC)
    ICC IBC: International Building Code
3. SUBMITTALS
  1. Product Data: Manufacturer’s data sheet and installation instructions.
  2. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified acoustical panel.
  3. Test Reports: Upon request, submit certified test reports to verify specified product performance.
4. QUALITY ASSURANCE
  1. Qualifications:
    Manufacturers: Provide acoustical ceiling panels from a single manufacturer.
    Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
  2. Performance Requirements:
    Surface Burning Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM E84. Acoustical panel surface burning performance should comply with the International Building Code and other local building code requirements.
    Acoustical Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM C423.
5. DELIVERY, STORAGE, AND HANDLING
  1. Storage and Handling Requirements:
    Handle panels carefully to avoid any damage.
    Store panels indoors in a clean, cool, dry place, and out of direct sunlight.
    Store panels in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
6. SITE CONDITIONS
  1. Ambient Conditions:
    Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
    Do not install products under environmental conditions outside manufacturer’s recommended limits.
  2. Existing Conditions: Do not install ceiling panels until space is enclosed and weather proofed, wet work is completely dry, and work above ceilings is complete.
7. WARRANTY
  1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.
PART 2 PRODUCTS
(Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional CFAB information can be found on our website www.acousticalsurfaces.com

MANUFACTURERS
1. 1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
    Phone: 952-448-5300. Fax: 952-448-2613. Website: <a href="http://www.acousticalsurfaces.com
2. " class="redactor-autoparser-object">www.acousticalsurfaces.com; DESCRIPTION
  Product: CFAB cellulose acoustical and thermal ceiling panels by Acoustical Surfaces, Inc.
  Product Options:
  Panel Composition: Recycled cellulose, cotton, and PET fibers
  Panel Density: (3lb pcf) – 1” and 2” thicknesses
  (6lb pcf) – 1” thickness
  (8lb pcf) – 1/2" and 1” thicknesses
  Panel Thickness: (1/2”) / (1”) / (2”)
  Panel Size: (2’ x 4’) / (4’ x 8’) / (Custom up to 4’ x 8’)
  Mounting Method: Adhesive, Stick pins
  Product Performance:
  Acoustical Performance
  Noise Reduction Coefficient (NRC) per ASTM C423
<a href="http://www.acousticalsurfaces.com
" class="redactor-autoparser-object">

Thickness/Density

1/2" – 8lb pcf

1” – 3lb pcf

1” – 6lb pcf

2” – 3lb pcf

A Mount

0.50

0.80

0.80

1.00

Surface Burning Performance
Fire Rating per ASTM E84: Class A.
PART 3 EXECUTION
EXAMINATION
Verification of Conditions:
Examine surfaces scheduled to received furred out or directly attached acoustical units for unevenness, irregularities or dampness that would affect quality and execution of work.
All wet work in the installation area must be complete, cured, and dry prior to installation.
Work above ceilings shall be complete, inspected, and accepted before ceiling work begins.
INSTALLATION
Comply with manufacturer’s instructions and recommendations for installation of ceiling panels and with industry standards.
CLEANING
Clean surfaces of ceiling panels per manufacturer’s instructions or recommendations.
Remove and replace damaged or discolored material and material that cannot be properly cleaned.
PROTECTION
Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.
END OF SECTION

기술 사양

특징 참조acoustical-surfaces-cfab-cellulose-panels
제품군Building Materials
제품분류Acoustical Wall Treatment
유형개체 (단일 개체)
게시일2013-06-18
에디션 넘버1
높이(인치)48
너비(inches)24
깊이(inches)0.5

링크

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코