Areas of application:
All types of façade surfaces.
All shapes: flat, curved, concave, convex, conical, domes.
Support
The support must be :
- Rigid and continuous.
- Meet loading requirements in conformity with a minimum pull out strength of 50 daN for each clip.
- Rest on at least 3 bearing structure elements.
- Have no protruding elements on the support.
Installation:
Lay in long sheets up to 4 m vertically and 6 m horizontally.
Finishe joint: Height 25 mm, thikness 5 mm
Fixing:
Fixed and sliding stainless steel legs (type VMZINC), type 1, placed every 33 cm and crimped with statements from the cladding tanks.
Weather conditions : All regions wind
Packaging:
Profile rollers or performed strips on request.
The choice by a professional of a VMZINC product adapted to the environment of a building must integrate the possible constraints of use according to the aspect of surface considered. Each aspect of zinc surface can evolve in time differently depending on the type of environment (seaside, high UV exposure, snow, etc.) and according to the applications (cover, facade, rain evacuation).
The use of the chosen aspect may not be suitable for certain applications in the context of very aggressive environmental constraints
If your project is higher than 30 meters and/or if it is in an area where wind speed is higher than 170 km/h once a year, please consult VM Building Solutions.
