100% vegetal on fertile foundation - complete O2D system

Technical information on the fertile foundation material for light vehicle parking with O2D GREEN® pre-grassed grids and TTE® Multidrain^Plus grids for grassing

Composition :
•  15 cm thickness: TP GREEN soil and stone foundation material
 o 75% crushed material of particle size 20/40 mm
     o 25% organic substrate (topsoil/washed sand/compost) of particle size 0/10 mm
•  3 cm thickness: LP GREEN fertile bedding course
     o 60% crushed material of particle size 4/6 mm
     o 20 % topsoil/loam mixture of particle size 0/10 mm
     o 20% sand of particle size 0/4 mm

Prepared base/sub-base (-23 cm in relation to level 0):
•  The requisite permeability below this foundation system is such that K > 10^-6 m/s
•  The load-bearing level required is such that EV2 > 40 MPa (EV2/EV1 < 2)
•  We recommend the installation of a permeable anti-contaminant geotextile membrane

This fertile foundation material composition ensures both load-bearing and drainage capabilities, and provides the requisite nutrients for the effective rooting of grass. It is recommended that the thickness of the sub-base (for example, 20/40 mm crushed drainage gravel) should be adjusted and/or any other facility should be incorporated, if the natural ground surface does not possess the requisite infiltration properties, or for the satisfaction of project design requirements. The load-bearing level should be appropriate to the intended application.

Technical information on TTE® grid

Product name:
TTE® Multidrain^Plus grid

Material:
100% recycled and recyclable domestic mixed plastic – German DUAL system

Dimensions:
Approximate dimensions: length 80 x width 40 x height 6 cm (+/- 2mm), comprised of 32 cells of dimensions 8 x 8 cm (1 m² = 3.125 grids)

Colouring of grids:
Anthracite grey (variable)

Weight - unladen:
Approximately 9 kg/grid, or approximately 28 kg/m² unladen

Weight – pre-grassed:
Approximately 22 kg/grid, or approximately 69 kg/m² pre-grassed

Surface finish:
Anti-slip ribs of thickness 2 mm

Underside:
T-profile support width of approximately 4.2 cm – 1.5 cm assembly joint on either side

Static load resistance:
10 Newtons/mm² (equivalent to 1,000 tonnes/m²)

Puncture resistance:
> 100 kN on a surface of diameter 20 cm (compliant for emergency service roadways) – GINGER CEBTP certification

Axle loading:
20 tonnes (147 kN)/unit of 4 unladen cells (20 x 20 cm) – Certified by the TÜV SUD (official German certification organization)

Technical information on TTE® concrete paving

Product name:
TTE® concrete paving

Dimensions:
Length 7.4 x width 7.4 x height 4.9 cm

Colours available:
Grey, red, anthracite, yellow stone, brown, white, green, blue, pink

Weight:
615 g/paving stone

Infill recommendation (unfilled grid)

Grassing in situ:
Pre-seeded substrate O2D SR GREEN®