Product Specification
Submersible centrifugal pump, spiral body, single stage, semi-open radial flow impeller, flanged discharge, bearing-mounted, shaft sealing through double mechanical seal.
General Applications
The HIPPO Series was developed to pump water with suspended solids in industrial, agricultural, water supply, and municipal sanitation applications.
- Lift stations
- Effluent treatment stations
- Drainage of wastewater and rainwater
Constructive Features
- Flanged outlet according to ASME B 16.5 and DIN 2532 standards
- Casing made of gray cast iron GG-25
- Semi-open impeller made of nodular cast iron GGG-50
- Bottom plate made of gray cast iron GG-25
- Double mechanical seal in AISI-304 stainless steel, Buna N, Silicon carbide (SiC/SiC), and Graphite/Ceramic
- Moisture sensor in the oil chamber
- Thermal protection
- IE3 IP-68 electric motor, 4 poles, 60Hz, class H insulation, AISI-420 stainless steel shaft
- Lifting handle in 304 stainless steel
- Cable length: 10 m
- O-ring seals: Buna (NBR)
Technical Specifications
- Maximum liquid temperature: 40°C
- Maximum submersion depth: 20 m
- Installation in a wet well
- Spherical solid passage of 65 mm for the HIPPO 4NH series and 76 mm for the HIPPO 6NF series
Optional Features
- Double mechanical seal in AISI-304 stainless steel, Buna N, Tungsten (Tung/Tung), and Graphite/Ceramic
- Cable length: 25 m
- Moisture sensor in the motor chamber
- PT100 thermal sensor
- Abrasion-resistant coating
Important
- Do not handle the pump with the motor powered: risk of electric shock
- Not suitable for pumping potable water
- For use outside the specified applications, consult the manufacturer
- Refer to the Instruction Manual for additional operational precautions
4.6 
