• Maximum working pressure: 16, 25, 30, 35 bar (depends on the model)
• Liquid temperature range (clear water): -30ºC to 140ºC
• MEI > 0,7
• Poles: 2
• Insulation class:
F for single phase version
F (temperature rise class B) for three phase version
• Protection degree:
IP55 (up to 11kW)
IP56 (above 15kW)
• Voltage:
- Single phase 230V±10%
- Three phase 230/400V±10% (up to 4kW)
- Three phase 400/690V±10% (above 5,5kW)
• Outer casing in AISI 316L (EN 1.4404) stainless steel
• Bottom casing in AISI 316L (EN 1.4404) - ASTM CF8 (EN 1.4308)
• Impeller in AISI 316L (EN 1.4404) stainless steel
• Shaft in AISI 316L (EN 1.4404)
• Mechanical seal:
SiC/Carbon/EPDM or FPM
SiC graphite/SiC/EPDM or FPM
• Motor support in cast iron ENGJL-200 EN1561
• Pipe connection:
- Round flange (F)
- Oval flange (N)
- Loose round flange (LF)
- Victaulic® connection (V)
- Clamp connection (C)
• Commercial motors can be fitted to all of the pump models without any modifications thanks to low pump axial thrust load
• Long life of the motor bearing
• Patent Pending
• Cartridge shaft seal can be easily replaced without disassembly of motor bracket
• The spacer coupling allows easy maintenance without having to remove heavy motors over 5,5 kW
• IE3 efficiency for both 50 and 60 Hz operation, according IEC 60034-30 standard (IE3 for 60Hz is depending on motor size and voltage)
• ETM motors are available from 0,75 up to 11 kW for both 50 and 60 Hz (All other sizes including single phase motors are available with commercial IEC standard motors)
• PTC sensors (thermistors) are standard from 1,5 kW upwards for motor protection at 150°C
• Unloosable screws and sealing are standard for terminal box fixing from 0,75 kW upwards
• Stable inverter mounting on fan covers made of pressed steel
• Capacity: up to 320 m3/h
• Total Head: up to 120 m