DM-NVX-351C - DigitalMedia™ 4K60 4:4:4 HDR Network AV Encoder/Decoder Card w/Downmixing

Encoding/Decoding

Video Compression - JPEG 2000
Video Resolutions - Up to 4096x2160@60Hz (DCI 4K60), 4:4:4 color sampling, HDR10 and Deep Color support
Audio Formats - Primary multichannel (up to 8-channel LPCM or encoded HBR 7.1 surround sound), secondary 2-channel LPCM
Bitrates - 100 to 990 Mbps
Streaming Protocols - RTP, RTSP, SDP
Container - MPEG-2 transport stream (.ts)
Session Initiation - Multicast via RTSP
Copy Protection - HDCP 2.2

Video
Input Signal Types - HDMI w/HDR10, Deep Color, and 4K60 4:4:4 support [1,9] (Dual-Mode DisplayPort and DVI compatible [10]) -  
Output Signal Types - HDMI w/HDR10, Deep Color, and 4K60 4:4:4 support [1] (DVI compatible [10])
Switcher - 2x1 auto-switching, Crestron QuickSwitch HD™ technology
Scaler - 4K60 4:4:4 video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, HDR10 support, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing up to 8 wide x up to 8 high, static or dynamic text overlay
Copy Protection - HDCP 2.2
 
Audio
Input Signal Types - HDMI (Dual-Mode DisplayPort compatible [10]), analog stereo [5]
Output Signal Types - HDMI (multichannel pass-through or 2-channel downmix), analog stereo (2-channel downmix) [5]
Digital Formats - Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
Analog Formats - Stereo 2-Channel
Analog-To-Digital Conversion - 24-bit 48 kHz
Digital-To-Analog Conversion - 24-bit 48 kHz
Analog Performance - Frequency Response: 20 Hz to 20 kHz ±0.5 dB; S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted; THD+N: <0.005% @="" 1=""> Stereo Separation: >90 dB
Analog Output Volume Adjustment - -80 to +20 dB

Communications
Ethernet - 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1x, IPv4, HTTPS web browser setup and control, Crestron control system integration
USB - USB 2.0 host or device signal extension
HDMI - HDCP 2.2, EDID, CEC
DM NVX (via Ethernet) - HDCP 2.2, AES, RTP, RTSP, SDP, ONVIF, IGMPv3 (v2 coming soon), SMPTE 2022
NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system

Connectors
USB DEVICE - (1) USB Type B female; USB 2.0 device port; USB signal extender port for connection to a computer or any other USB 2.0 host [4]
USB HOST - (1) USB Type A female; USB 2.0 host port; USB signal extender port for connection of a mouse, keyboard, or any other USB 2.0 device [4]; Available Power: 500 mA at 5 Volts DC
LAN 1 – 2 - (2) 8-pin RJ45 female; 10Base-T/100Base-TX/1000Base-T Ethernet ports 
LAN 3 - (1) SFP port; Accepts one Crestron SFP-1G series SFP transceiver module [2]
HDMI OUTPUT - (1) 19-pin Type A HDMI female; HDMI digital video/audio output (DVI compatible [10]) [1]
HDMI INPUT 1 – 2 - (2) 19-pin Type A HDMI female; HDMI digital video/audio inputs [1]; (DVI & Dual-Mode DisplayPort compatible [10])
AUDIO I/O - (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio input or output [5]; Input Impedance: 24k Ohms balanced/unbalanced; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced

Controls & Indicators
TX - (1) Green LED, indicates unit is in transmitter (encoder) mode
RX - (1) Green LED, indicates unit is in receiver (decoder) mode
OL - (1) Green LED, indicates an online connection to a control system via Ethernet
LAN 1 – 2 - (4) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
LAN 3 LNK - (1) Green LED, indicates Ethernet link status
LAN 3 ACT - (1) Green LED, indicates Ethernet activity
HDMI OUTPUT - (1) Green LED, indicates video signal transmission at the HDMI output
HDMI INPUT 1 – 2 - (2) Green LEDs, each indicates sync detection at the corresponding HDMI input

Construction
Plug-in card, occupies (1) card slot in a DMF-CI-8 card chassis, includes metal faceplate

Weight - 15.1 oz (427 g)

1. 4K60 4:4:4 performance requires the use of HDMI cables with a minimum TMDS bandwidth of 18 Gbps, such as Crestron model CBL-HD (20 ft / 6.1 m max. length). If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables with a minimum bandwidth of 10.2 Gbps may be used, such as Crestron models CBL-HD-LOCK or CBL-HD (any available length). Performance may also be affected if an HDMI coupler is inserted in the HDMI signal path. Crestron coupling products (MP-WP150, MP-WP152, MPI-WP150, or FTA-CP-HD-101) and cable retractors (CBLR2-HD) all have a specified bandwidth of 10.2 Gbps, and thus do not support 4K60 4:4:4. Please be aware that bandwidth loss is cumulative, so the combination of multiple components inserted inline may reduce performance.
2. To add a fiber optic LAN port requires the purchase of a Crestron SFP-1G series SFP transceiver module (sold separately). All LAN ports on the DM-NVX-351C are for connection to an Ethernet based AV network or device; they cannot be connected to the “DM” ports of other Crestron devices.
3. When in encoder mode, the HDMI output resolution is matched to the resolution of the encoded source.
4. The DM-NVX-351C can be configured to accept the connection of a USB device or a USB host, not both. Crestron DM NVX products are engineered to deliver maximum compatibility with the widest possible range of USB products. Crestron does not guarantee that all USB products are compatible with DM NVX products. DM NVX is compatible with Crestron USB-EXT-DM products, but is not compatible with the “USB HID only” signal extender technology found in other Crestron DM products.
5. The analog audio port can function as an input or output, not both.
6. Audio from one onboard HDMI input may not be combined with video from the other onboard HDMI input.
7. Combining audio from one encoder with video from another encoder utilizes the secondary 2-channel audio stream. Multichannel audio from one encoder cannot be combined with video from another encoder.
8. Device control via CEC requires integration with a Crestron control system.
9. 3D video input signals are automatically converted to 2D.
10. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.