CD60GS (GENSET) Damper

Name: CD60GS (GENSET) Damper
Rating: 4.2 (5 reviews)

4.2(5 recensioni)

High-performance Galvanized Steel Airfoil Blade Damper AMCA Class IA Leakage Rated (GENSET)

The CD60GS is designed to provide maximum combustion air and pressure relief quickly for emergency generator start up to avoid damage of equipment orsurrounding space. The factory mounted fast-acting 8-second spring open actuatorprovides optimal performance and reliability. The CD60GS also provides AMCA class 1A leakage rating of 3cfm/ft2 at 1” w.g. when blades are closed to meet requirements of the International Energy Conservation Code (IECC).

Voce di capitolato

Furnish and install, at locations shown on plans, low leakage airfoil control dampers meeting the following minimum construction standards. Control dampers shall be produced in an ISO9001 certified factory. Frame shall be one-piece uniframe construction of 16 ga. (1.6) galvanized steel roll formed hat channel structurally equivalent to a minimum 13 ga. (2.4) frame. Blades shall be 14 ga. (2.0) equivalent galvanized steel, rollformed airfoil type for low pressure drop and low noise generation. Blade edge seals shall be Santoprene TPV type or equivalent mechanically locked into the blade edge.
Adhesive or clip-on type seals are unacceptable. Jamb seals shall be stainless steel chambered compression type to prevent leakage between blade end and damper frame. Blade end overlapping frame is unacceptable. Multiple section dampers must have factory installed jackshafts unless clearly eliminated by engineer. Bearings shall be 304 stainless steel, oil impregnated, and self-lubricating sleeve type with a 450 pound (204 kg) minimum radial crush load. Bearings shall turn in extruded holes in the damper frame. Axles shall be hexagonal positively locked into the damper blade.
Linkage shall be concealed out of airstream, within the damper frame to reduce pressure drop and noise. Temperature limits shall be -72°(-58°C) to +275°F (+135°C). Submittal must include leakage, maximum air flow and maximum pressure ratings based on AMCA Publication 500. Damper shall be tested and licensed in accordance with AMCA 511 for Air Performance and Air Leakage. Damper widths from 12” to 48” (305 to 1219) wide shall not leak any greater than 3 cfm/sq.ft. at 1” w.g. (15.2 l/s-m2
at .25 kPa). Damper shall be factory equipped with fast acting 8-second spring return electric actuator with 40,000 open/closed cycle testing, and shall be equivalent in all respects to Ruskin Model CD60GS.

Specifiche tecniche

Rif. UnicoCD60GS
Famiglia di prodottoDampers for Air Ductwork
Gruppo di famigliaCommercial Control Dampers
TipoOggetto (oggetto singolo)
Data di pubblicazione2022-07-28
Numero di versione1

Links

Link al Prodottohttps://www.ruskin.com/model/cd60gs-genset
Descrizione Tecnicahttps://www.ruskin.com/doc/Id/9866
Informazioni sulle gare d'appaltohttps://www.ruskin.com/doc/Id/10091

Relativo a

Materiale principaleAcciaio zincato
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Canalizzazione
Clasificazione IFCSmorzatore
Nome UNSPSCVentilation dampers
Codice UNSPSC40101504
Codice Uniclass 2015Pr_65_65_24
Descrizione Uniclass 2015Duct dampers
Codice CSI MasterFormat 201423 09 13.43
Titolo CSI MasterFormat 2014Control Dampers
Numero OmniClass23-33 29 00
Titolo OmniClassHVAC Dampers
Codice CSI UniFormat IID3090
Titolo CSI UniFormat IIOther HVAC Systems & Equipment

Disponibilità Regionale

Europa	Asia	Nord America	Africa	Sud America	Oceania
Albania	Afghanistan	Anguilla	Algeria	Argentina	Australia
Andorra	Arabia Saudita	Antigua e Barbuda	Angola	Bolivia	Figi
Austria	Armenia	Aruba	Benin	Brasile	Guam
Belgio	Azerbaijan	Bahamas	Botswana	Cile	Isola Norfolk
Bielorussia	Bahrein	Barbados	Burkina Faso	Colombia	Isole Cook
Bosnia ed Erzegovina	Bangladesh	Belize	Burundi	Ecuador	Isole Marianne Settentrionali
Bulgaria	Bhutan	Bermuda	Camerun	Guiana Francese	Isole Marshall
Cipro	Brunei	Canada	Capo Verde	Guyana	Isole Minori Esterne degli Stati Uniti
Città del Vaticano	Cambogia	Costa Rica	Ciad	Isole Falkland (Malvine)	Isole Pitcairn
Croazia	Cina	Cuba	Comore	Paraguay	Isole Salomone
Danimarca	Corea del Nord	Curaçao	Congo	Perù	Kiribati
Estonia	Corea del Sud	Dominica	Costa d'Avorio	Suriname	Nauru
Finlandia	Emirati Arabi Uniti	El Salvador	Egitto	Uruguay	Niue
Francia	Filippine	Giamaica	Eritrea	Venezuela	Nuova Caledonia
Germania	Georgia	Grenada	eSwatini		Nuova Zelanda
Gibilterra	Giappone	Groenlandia	Etiopia		Palau
Grecia	Giordania	Guadalupa	Gabon		Papua Nuova Guinea
Guernsey	Hong Kong	Guatemala	Gambia		Polinesia Francese
Irlanda	India	Haiti	Ghana		Samoa
Islanda	Indonesia	Honduras	Gibuti		Samoa Americane
Isola di Man	Iran	Isole BES	Guinea		Stati Federati di Micronesia
Isole Åland	Iraq	Isole Cayman	Guinea Equatoriale		Timor Est
Isole Faroe	Isola di Natale	Isole Turks e Caicos	Guinea-Bissau		Tokelau
Italia	Isole Cocos (Keeling)	Isole Vergini Americane	Kenya		Tonga
Jersey	Israele	Isole Vergini britanniche	Lesotho		Tuvalu
Lettonia	Kazakistan	Martinica	Liberia		Vanuatu
Liechtenstein	Kirghizistan	Messico	Libia		Wallis e Futuna
Lituania	Kuwait	Montserrat	Madagascar
Lussemburgo	Laos	Nicaragua	Malawi
Macedonia del Nord	Libano	Panamá	Mali
Malta	Macau	Porto Rico	Marocco
Moldavia	Maldive	Repubblica Dominicana	Mauritania
Monaco	Malesia	Saint Kitts e Nevis	Mauritius
Montenegro	Mongolia	Saint Martin	Mayotte
Norvegia	Myanmar (Burma)	Saint Vincent e Grenadine	Mozambico
Paesi Bassi	Nepal	Saint-Barthélemy	Namibia
Polonia	Oman	Saint-Pierre e Miquelon	Niger
Portogallo	Pakistan	Santa Lucia	Nigeria
Regno Unito	Palestina	Sint Maarten	Repubblica Centrafricana
Repubblica Ceca	Qatar	Stati Uniti	Repubblica Democratica del Congo
Romania	Singapore	Trinidad e Tobago	Riunione
Russia	Siria		Ruanda
San Marino	Sri Lanka		Sahara Occidentale
Serbia	Tagikistan		Sant'Elena
Slovacchia	Tailandia		São Tomé e Príncipe
Slovenia	Taiwan		Senegal
Spagna	Territori Britannici dell'Oceano Indiano		Seychelles
Svalbard e Jan Mayen	Turchia		Sierra Leone
Svezia	Turkmenistan		Somalia
Svizzera	Uzbekistan		Sudafrica
Ucraina	Vietnam		Sudan
Ungheria	Yemen		Sudan del Sud
			Tanzania
			Togo
			Tunisia
			Uganda
			Zambia
			Zimbabwe