Pubblica i tuoi prodotti
Commercial Condensing Tankless - Indoor
Commercial Condensing Tankless - Indoor

    Commercial Condensing Tankless - Indoor

    Efficiency

    • Up to 96% Thermal Efficiency with stainless steel condensing heat exchanger
    • Intelligent electronic controls designed to increase energy efficiency and safety

    Performance

    • Low flow fixture compatible – Industry minimum flow rate of .26 GPM and minimum activation flow rate of .40 GPM ensures the user will receive hot water even in low demand situations
    • Recirculation Pump Kit-Ready – Quickly pairs with our Recirculation Pump kit to provide instantaneous hot water at the tap2

    Easy Installation and Service

    • Ability to vent with room air
    • Indoor, Natural Gas units are common vent compatible up to 10 units
    • Common venting with Polypropelene 
    • Built-in condensate neutralizer
    • 1/2" Gas line compatibility on every model
    • Exclusive! Maintenance Notice Setting Alerts – flashing a warning code to call for service check
    • Self-diagnostic system for easy installation and service
    • Digital display shows temperature setting and maintenance codes
    • Two-pipe direct vent system designed for PVC pipe (up to 38 ft. of 3" PVC pipe or 5 ft. of 2" PVC pipe)
    • High altitude capability up to 8,400 ft
    • Commercial Project Sizing Available from Rheem Applications Engineers
    • Digital remote control and 10 ft. of thermostat wire included
    • Freeze protection to -30°F

    Technology

    • Manifold control models - with factory installed translator links up to 20 units
    • Hot-start programming - helps minimize fluctuation in water temperature, referred to as “cold water sandwich”, during periods of frequent on/off operation
    • Exclusive! Overheat film wrap with industry-best side to side clearance of 1/2 inch

    Parts & Accessories

    • EZ Rack Kit
    • Common Venting: Direct Vent & Room Air header kits
    • AllClear®  Water Treatment System
    Specifiche tecniche
    • Rif. UnicoRGTH_C_indoor
    • Famiglia di prodottoTankless
    • Gruppo di famigliaCommercial Gas
    • TipoOggetto (oggetto singolo)
    • Data di pubblicazione2018-09-10
    • Numero di versione1
    • Altezza (pollici)27.5
    • Larghezza (pollici)18.5
    • Profondità (pollici)9.75
    Relativo a
    • Materiale principaleAcciaio inossidabile
    • Progettato inStati Uniti
    • Prodotto inStati Uniti
    • Peso Netto (Libbre)82
    Classificazioni
    • Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Scaldabagno
    • Codice ETIMEC000392
    • Nome ETIMInstantaneous water heater
    • Codice Uniclass 2015Ss_55_70_38_45
    • Descrizione Uniclass 2015Instantaneous hot water supply systems
    • Codice CSI MasterFormat 201422 34 13
    • Titolo CSI MasterFormat 2014Instantaneous, Tankless, Gas Domestic Water Heaters
    • Numero OmniClass23-31 29 11 13
    • Titolo OmniClassGas Instantaneous Hot Water Heaters

    Disponibilità Regionale

    Nord America
    Canada
    Stati Uniti